2006-2010  SUZUKI  GSXR600 (USA model with 43t rear)

Complete Performance JT  Z3  525 X-Ring Chain & Supersprox Rear Sprocket Kit

 (This Correct Strength X-Ring Chain is rated for use up to 1300cc)

Exact OEM Ratio 16/43t   

       -or-   *Quick Acceleration 15/43t (-1t/oem)*   

              -or-   Extreme Quick Acceleration 15/45t (-1t/+2t)

 

 

*Included in this kit unless otherwise specified: QUICK ACCELERATION 15/43t gearing sizes as follows..

 

JT 15 (-1t) tooth Front & 43 tooth lightweight SuperSprox Steel/Aluminum Rear Sprocket in Gold/Black (scm420 Chromoly Japan steel alloy front, Gold Alum/Black High Strength Steel Teeth rear) and a Japan steel JT Z3 525x114L "Black"/Natural Silver       X-Ring Chain w/ a Rivet type master link. 

Leave note in "Message to Seller" tab during step 2 of checkout to request optional size sprockets.

 

Available optional gear ratios! Message or Call RPE Motorcycle to special order!


JT Z3 525 Performance X-Ring Chain & Sprockets are sent with a  RIVET  type master link.

Additional RIVET TYPE  MASTER LINKS ARE AVAILABLE FOR $9.95usd 
      (Request additional RIVET TYPE master link in the "Add Message" tab during check out and a bill will be sent)
 


For Reference...

2006-2010 Suzuki GSXR600 OEM size is 525x114 x-ring chain, 16t Ft. Sprocket, 43t Rear Sprocket
       **This kit takes a DIFFERENT rear sprocket hub pattern than the 2011-2024 GSXR600**
                     (This kit is provided with all 525 size chain and sprocket components) 

For QUICK ACCELERATION 15/43t gear ratio (off the line, roll on's, wheelies), use a 15t front sprocket. (This is the default gearing for this kit as advertised)
      (the -1t front sprocket change is versatile because you can change back to the stock size 16t with same chain)

 For EXTREME QUICK ACCELERATION 15/45t  gear ratio (off the line, roll on's, wheelies), Request a 15t (-1t) front sprocket and a 45t (+2t) rear sprocket. 
      Request this 15t/45t (-1t ft /+2t rear) during check out in the "Add Message" tab 
(the -1t front sprocket change is versatile because you can change back to the stock size 16t with same chain)
  
For Original Factory Supplied OEM 17/43t size sprockets are the calculated "Happy Medium" of off the line acceleration, roll on's, and reasonable high speed engine rpm's with the least amount of compromise on either top end or low end acceleration.  Request 16/43t OEM gear ratio during checkout in the "Add Message" Tab.


Available 525 Sprocket Sizes;

JT 525 Japan Steel Ft. Sprocket is available in 525 x 15t, 16t, and 17 teeth

SuperSprox 525 Gold/Black Steel Rr. Sprocket is available in 525 x 41t , 42t, 43t, 44t, 45t, and 47 teeth


Also Available in Blue/Black or Red/Black for an additional $15.00usd     

  - Red/Black SuperSprox Stealth rear sprocket available in a 525 x 43t, 45t, or 47t (ONLY)

  - Blue/Black SuperSprox Stealth rear sprocket available in a 525 x 43t, 45t, or 47t (ONLY)


All chain and sprocket kits available in RK and DID 520 , 525 or 530 X-ring  (call for prices)

 

All JT Z3 Natural Silver/Black 520 chains include RIVET type master link ONLY.
 
Additional "Rivet type" JT Z3  master links are available from RPE Motorcycle for $9.95 each
 
 
                                
Also available from RPE Motorcycle...CHAIN TOOL IS AN  OPTIONAL ACCESSORY 
(NOT included with chain and sprockets price)

 Pro Chain Tool Kit @ $79.95 when purchased with a chain & sprockets kit!
  • Complete chain tool for most 520, 525 and 530 standard and o-ring chains
  • Break, press and rivet your chain with one compact tool
  • Will rivet hollow nose master links (will not rivet solid soft-nose pins)
  • Will push pin completely through link/side plate
  • Hardened body, riveting tip and breaker pin for strength and durability
  • Removable handle for compact storage
  • Perfect for trail/road tool pack if you have a chain with a rivet master link
    •
     

          RPE Motorcycle
    10725 Beverly Blvd, Whittier, CA 90601  


    Hours: Mon-Fri = 10am-6pm  **Pacific Std. Time**



    We accept Visa, Master Charge, Discover, American Express 
                    
     
    *FREE Shipping to USA only.. Hawaii, Guam, V.I., Puerto Rico, and Alaska included!!!
     
     
    * INTERNATIONAL BUYERS...     PLEASE LEAVE YOUR PHONE NUMBER FOR SHIPPING DOCUMENTS!!
      
    Shipping time varies by country, and individual customs department situations...
     
     
     
    JT & Supersprox Sprockets and JT Chain, the leading edge technology in production and materials with total dedication to excellence gives you the ultimate motorcycle sprocket and chain range at unbeatable value. Our mission is to supply you the most innovative and competitive product line fully backed by complete availability and service. Your Absolute Satisfaction is our Commitment with JT & Supersprox Sprockets  and JT Chain - World Class Top Manufacturers of aftermarket motorcycle chain and sprockets, constantly raising the industry's standards in performance, longevity and reliability.
     
     

    Half the Power Loss (Compared with Normal O-Ring)  X-Ring construction reduces friction by twisting between the side plates instead of being squashed.

    Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The twisting action of the X-Ring disperses the pressure and minimizes power loss.   

    1.5 to 2 TImes Longer Wear Resistance (Compared with Normal O-Ring) The X-Ring’s four contact points greatly increase its sealing performance. This keeps the dirt out and the

     lubrication in much better than any other O-Ring.   X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain .

     

    Why JT?

    JT Sprockets is the world's leading manufacturer of aftermarket sprockets and chain, constantly raising the industry's standards for quality and service.

     We are committed to supplying the most durable, best quality drive components available in the marketplace worldwide. This is why we produce and sell

     more sprockets than all the other aftermarket brands combined.

    Raw Materials

    JT sprockets are made using only the best available materials. Aviation-grade 7075-T6 aluminium alloy for lightweight competition sprockets,

    SCM415 chromoly steel alloy for front sprockets, and we are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.

    Production

    The JT Sprockets factory is the largest and most advanced in the world. It is fully equipped with high accuracy machinery, including the latest generation

     of CNC computer design and computer controlled metal cutting equipment.

    The essence of a high quality sprocket is in the high precision of manufacturing and the inherent quality of the material. Through accurate machining,

    JT ensures maximum durability and performance.

    JT Sprockets are manufactured the right way – by hobbing, machining and drilling. This is the only proven way to achieve the closest of tolerances

     and the most accurate teeth profiles.

    Heat treated and hand finished to perfection, all JT sprockets meet or exceed the highest possible quality standards set for the motorcycle industry.

    Quality Control

    Every sprocket goes through up to 25 production stages and 10 individual quality control checks before it is ready to leave the factory and

     the production facility has achieved the highest European quality standards