Disc Pad / Caliper Alignment tool - First Class Postage

Used to help align the caliper so the disc stops rubbing.  Handy workshop tool or when out on the road.

Size:

Length = 56mm

Height = 19mm

Inside Width = 3mm

Weight = 4g

Guidance steps:

1: Loosen the caliper bolts aleast 1 full turn so the caliper moves freely

2: Carefully place the tool over the rotor, rotate until it is positioned between the pads

3: Pull and release the brake lever a few times

4: Hold the brake lever on then tighten the caliper bolts evenly

5: Release the lever and carefully turn the rotor back to expose and retrieve the tool

If rubbing still continues after multiple tries it may mean you disc needs truing