Albatron KX18D Pro II + Athlon XP 2600+ + 1 GB RAM DDR 400 (Transcend)

Last tested about 3 years ago.At the time it was working great,not used ot tested since then.

CPU heat sink included but is out of place, needs new thermal paste.

Also included:

Bracket with Mic-in, Earphone out and S/PDIF In/Out
Bracket with 4 USB 2.0 ports
Bracket with Modem card
Bracket with PCI TV Tuner card
4-pin M/B Speaker



Motherboard Specs:

CPU Interface Socket-462
Chipset nForce2 Ultra 400 North Bridge
nForce2 MCP-T South Bridge
Bus Speeds 100 to 300MHz (in 1MHz increments)
PCI/AGP Speeds Auto (Variable) or Fixed 50-100MHz
(in 1 MHz increments)
Available CPU Ratios 5.0X to 24X
Available Dimm Ratios 1.0, 1.2, 1.33, 1.5, 1.6, 1.66, SPD, 2.0, 2.4, 2.5, 2.66, 3.0, 3.33, 4.0
Core Voltage 1.10 to 2.65V (1.10 to 1.85v in 0.025v increments,
1.90v to 2.65v in 0.05v increments)
DRAM Voltage 2.50v to 3.0 (in 0.1v increments)
Chipset Voltage 1.6v to 1.9v (in 0.1v increments)
AGP Voltage 1.5v to 1.8v (in 0.1v increments)
Memory Slots Three 184-pin DDR DIMM Slots
in Dual-Channel Configuration
Expansion Slots 1 AGP 8X Slot
6 PCI Slots
Onboard IDE RAID Two Standard ATA133/100/66
(maximum 4 IDE devices)
Onboard USB 2.0/IEEE-1394 Six USB 2.0 ports supported by MCP-T
TI TSB41AB2 IEEE-1394 FireWire (2 ports)
Onboard LAN nForce MCP 10/100 Ethernet
Onboard Audio Realtek ALC650 codec
AC ’97 2.2 Compliant 6-Channel
Onboard Serial ATA Silicon Image Sil3112 supports Raid 0/1
BIOS Revision Dual BIOS — Release 1.00 7/22/2003