Why install smart power off switch:

*1. There are too many equipment modified on the car, such as positioners, alarms and dash-recorders, and other products have static current output due to functional needs.

*2. Many users will install spotlights, mobile phone holders, heating equipment, etc., which will speed up the aging of the battery, thereby shortening the service life of the battery.

*3. Any battery has the physical characteristics of self-discharge, by installing an intelligent power switch, you can effectively slow down the self-discharge speed of the battery, so as to extend the service life.

Product features:

*1. Control mode: thumb remote control, small and easy to carry; Remote control effective control distance up to 50 meters;

*2. Fine power consumption: the host adopts fine power consumption design, and the static current is only 0.05ma, which is 10 to 20 times smaller than the self-discharge of the battery;

*3. Driving constant power: the host built-in motion sensor and voltage detection dual protection, to ensure that the driving process will not power off;

*4. Core components: high-power magnetic holding relay, static almost no power consumption, no heat, low resistance;

*5. Waterproof performance: the host adopts waterproof silicone seal to prevent water;

*6. High quality: the internal use of pure copper components, better electrical conductivity, the port is tinned to avoid oxidation;

*7. External fuse: 1.5A fuse is used to effectively prevent overload and protect the safety of the body;

Device host parameters:

Operating voltage: 12~24 volts

Standby current: 0.05 MA

Working current: 150A

Installation method: positive/negative electrode can be installed (select according to need)

Product size: 81*41*20 mm

Remote control parameters:

Operating voltage: 12V

Standby current: 0

Transmission frequency: 433.92MHz

Remote control distance: 50 meters

Remote control battery: 27A

Product size: 67*16.5*14.5 mm

Packing list:

1 x smart power off switch

2 x remote control

1 x screw nuts

2 x double-sided tape

2 x cable ties

1 x instructions