PLEASE NOTE THE BUYER: There
is no wiring diagram, datasheet or instruction manual for this product.
Please contact us by email if you need any help, we will try our best
to help you, thank you!
Product Description:
The Texas Instruments TPA3250 device is a high-performance Class D power amplifier that delivers true high-quality sound with Class D efficiency. The device features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology enables ultra-low distortion and outstanding audio quality in the audio band. Powered by a 32 V supply, the device delivers up to 2 W x 130 W peak drive to a 4 Ω load or 2 W x 70 W continuous drive to an 8 Ω load, and features a 2 VRMS analog input interface for seamless mating with high-performance DACs such as the TI PCM5242. In addition to excellent audio performance, the TPA3250 also achieves high power efficiency and no-load power consumption of less than 1 W at the power stage. This is achieved by using a 60 mΩ MOSFET and optimized gate driver scheme, with much lower no-load losses than typical discrete devices.
Product Details:
Using original imported TPA3250
Electrolytic capacitor signal main circuit using chip electrolytic capacitor capacity 4 × 220UF, to ensure a strong source of power support.
Resistor selection of high-precision chip resistor, to ensure a good signal-to-noise ratio of the whole machine.
PCB adopts 1.6mm thick double-sided plate, 2.0oz copper thickness, spray tin full process, to ensure the good performance of the size of the current through. First-class PCB quality.
The use of fully shielded high-current inductor to ensure that the sound is crisp and powerful.
Basic parameters:
1. Operating mode: Class D
2. Static current: 50mA
3. Operating efficiency: 90%
4. rated output power: 2 * 130W
5. Frequency response: 20Hz to 20KHz
6. Operating voltage: DC18V to DC32V
7. Maximum output current: 4A
8. Size: L103*W78*H15MM
9. Weight: 0.08KG
Package:
1pc TPA3250 digital power amplifier 130W+130W Strero Channel Class D Amplifier board.


