Optical Fusion Splicer Handheld JILONG 500E

Mini FTTx 4 Motor Ative Clad-Alignment


JILONG Brief Introduction:

30 years of fusion splicers expertise has enabled us to designed the 500E to be a low-cost, easy to use, easy to maintain and economical ideal tool for FTTX fiber engineering, home installation and maintenance, security monitoring and other access network field. The JILONG 500E is a mini sized,Hand held, 4 motors, active cladding alignment fusion splicer. It has a high adaptability to operation environment, which can adapt to aerial operations aslo can be competent for any ground works.


500E Features:


1，World’s most compact, Lightweight and Fast Design

2，Stable aerial operation Design

3，Auto Splice & Auto Heat Function

4，Tool-less Electrodes replacement

5，Extended-life electrodes, 5,000 splices (replaceable)

6，3-Year Extended Warranty



500E Specifications:

Splice Method :

Active Clad-Alignment

Applicable Fibers :

SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655)

Compatible Fiber/Cable :

0.25~3.0 mm / indoor cable

Fiber Holder :

Replaceable

Fiber Diameter :

Cladding: 80-150μm，Coating: 100~1000μm

Fiber Cleave Length :

8~16 mm

Splice mode :

Max 128 modes

Typical Splice Loss :

SM: 0.03dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.03dB★①

Return Loss :

>>60dB

Splicing Time :

SM Quick mode : 8 sec / SM Average: 10 Sec.

Estimated Splice Loss :

Available

Heating Time :

Quick mode 18 sec.(SM G652 250μm 40mm Sleeve) adjustable

Protection Sleeve Length :

20mm, 30mm, 40mm, 50mm, 60mm

Heat Programs:

Max 32 modes

Battery :

3400mAh Battery Capacity, Typical 120 Cycles (Splice&Heat)

per Charge★②

Electrode Life :

5000 arcs（replaceable）★③

Auto-start :

Splice / Heating

Automatic Fiber Identification :

/

Automatic ARC Identification :

Automatic arc calibration by air pressure and temperature

Results Storage :

The last 10,000 splice records and 2,000 result images

Tension Test :

1.96~2.25N

Operating Condition :

Altitude: 0~5000m, 0~95% relative humidity, -20~50°C,

Max Wind 15m/s

Storage Condition :

0~95% relative humidity, -20~60°C

Display :

3.5” color high resolution (800 x 480) display

Fiber Magnification :

X, Y, XY, X/Y : 320X Magnification

Power Supply :

AC Input 100-240V, DC Input 9-14V

Terminal :

USB2.0

Weight :

1.06kg without battery / 1.35kg with battery

Size :

130H x 113W x 126D mm


★① With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.

★② Splice & Heat cycles based on 40mm shrink tube/0.25mm fiber,may vary depending on the battery status and operating environment. ★③ Electrode life may vary depending on the operating environment.

[● JILONG 500E Fiber ①Fusion Splicer Electrode life around 5000 times(Replaceable); Automatic splicing & automatic heating 

②JILONG 500E with Fast-splicing 8s Fast-heating 18s; The electrodes can be replaced by screwing it gently without tools 

③JILONG 500E Working platform design for aerial work; Support 120 times of splicing + heating when fully charged 

④JILONG 500E Rich expansibility fiber optic cleaver operating platform (Optional) Support the placement of cleaver operating platform, do cleaving and splicing work in one step (Operation platform be ordered separately) 

⑤JILONG 500E Fiber Splicing machine with 3.5” color high resolution (800 x 480) display; The last 10,000 splice records and 100 result images ]


Remarks:

Please kindly note that the green tri-hole fiber strippers now are instead of the below yellow tri-hole fiber strippers.