Goldfren Front Brake Pads 004AD Fits Gas Gas FSR 450 Enduro 2007 onwards
£13.49
Specifications
The AD sintered compound is optimal for street bikes, dual sport, touring, trial, cruisers. This compound makes for a perfect OE replacement due to its versatility. It is recommended for riders that do not ride really hard, but do want the good stopping power of a sintered brake pad when needed. The wearing rate of this sintered compound is 20% lower than other known sintered or semi-sintered brake pads in the same category.
The AD series is designed for very low abrasive interaction with the rotor and offers quieter braking due to the ceramic composite material.
Friction materials contain metal-ceramic and typical iron; finer additives are added to the base of the iron compound to achieve optimal friction properties.
FEATURES:
Wearing rate by 20% lower comparing with competitive sintered products of its category for common use.
Low abrasive interaction with the brake rotor material.
Three(3) times +/- longer operational life compared to organic and Kevlar composite Materials.
RANGE OF APPLICATION:
Specifically designed for common street riding.
On scooters, cruisers, street bikes and ATV.
Suitable for dry and wet conditions.
Could be used on off-road bikes front brakes for riders that don't ride hard.
MATERIAL OPERATING PARAMETERS:
The AD sintered compound is optimal for street bikes, dual sport, touring, trial, cruisers. This compound makes for a perfect OE replacement due to its versatility. It is recommended for riders that do not ride really hard, but do want the good stopping power of a sintered brake pad when needed. The wearing rate of this sintered compound is 20% lower than other known sintered or semi-sintered brake pads in the same category.
The AD series is designed for very low abrasive interaction with the rotor and offers quieter braking due to the ceramic composite material.
Friction materials contain metal-ceramic and typical iron; finer additives are added to the base of the iron compound to achieve optimal friction properties.
FEATURES:
High static friction coefficient.
Good abrasive resistance.
Thermal stability up to 450 degree celsius, and even up to 700 degree celsius over a short term.
Good abrasive resistance.
Thermal stability up to 450 degree celsius, and even up to 700 degree celsius over a short term.
Wearing rate by 20% lower comparing with competitive sintered products of its category for common use.
Low abrasive interaction with the brake rotor material.
Three(3) times +/- longer operational life compared to organic and Kevlar composite Materials.
RANGE OF APPLICATION:
Specifically designed for common street riding.
On scooters, cruisers, street bikes and ATV.
Suitable for dry and wet conditions.
Could be used on off-road bikes front brakes for riders that don't ride hard.
MATERIAL OPERATING PARAMETERS:
Specific pressure: P < 5.0 Mpa
Sliding speed: V < 40 m.s-1
Constant maximum temp.: 450 degree celsius
Short time maximum temp.: 700 degree celsius
Counter-surfaces: steel disks
Sliding speed: V < 40 m.s-1
Constant maximum temp.: 450 degree celsius
Short time maximum temp.: 700 degree celsius
Counter-surfaces: steel disks
APPLICATION
GAS GAS
FSR 450 Enduro 07 -
HONDA
CRM 50 (Made in Spain) 93 - 96
CRM 75 R 90 - 94
CR 125 RH, RJ, RK 87 - 94
AX-1 250 90 - 94
CR 250 R 87 - 91
CRM 250 R 90 -
NX 250 88 - 93
TRX 250 R 86 - 89
TRX 250 Xourtrax 87 - 92
XR 250 L 91 - 97
XR 250 R 84 - 95
ATC 350 X 86 -
CR 500 R 87 - 94
XR 600 R 88 - 92
[[PAYMENT]]
[[TOP_5_FEEDBACK]]
(1) All returns must be sent back in the same conditions as they were received.
(2) All returns must be sent back in their original packaging with tags attached.
(3) All returns must be in a resaleable condition in the original packaging.
(4) Postage and Packaging are strictly non-refundable.
(5) All returns must be first inspected and assessed to see if they meet the above requirements before refunds are authorised.
(6) Returned goods can be subject to a 20% handling charge.
(7) Special orders are not returnable at all.
