 | 1.Package
include: 7pcs Holders with inserts (Installed,as the pictures
show),Each tool holder comes with a Coated carbide insert with positive
rake cutting angle and built-in chip breaker great for general purpose
cutting action.Insert screw and wrench included; 2.The holders made of quality cemented carbide and tungsten steel, HRC up and down 48 degrees, high hardness,Offer long life and faster cutting speed 3.The inserts: carbide material with coating ,used for machining stainless steel and steel,Used for turning and finishing on a wide range of materials，the blade is sturdy, low friction coefficient, wear-proof and stable，Good wear resistance, sharp and durable ,smoothing cutting
|
 | SCLCR1212H06 Turning Tool Holder Model: SCLCR1212H06 Colour black Shaft diameter: 12 mm Handle L: 100 mm Wrench: T 15 Suitable for: semi-finishing, finishing |
 | SDJCR1212H07 Design: right Standard designation:SDJCR1212H07 Application: longitudinal turning Surface: burnished Total length [mm]:101 Cross section clamping shank [mm]: 12 x 12
SER1212H16 Total length: approx. 100mm /4 inch 1x SER1212H16 Holder 1x folding propeller |
 | MGEHR1212 Model: MGEHR1212-2 Insertion width: 2mm shank length: approx. 100 mm Shaft square diameter: Approx. 12 to 12 mm to 0.47,0.47 inch Screw wrench size: Approx. 95 to 25 mm to 3.7.0.98 inch Insert size: approx. 16 to 4mm to 0.63.0.15 inch
S12M-SCLCR06 Drill rod 95° S12M SCLCR 06 for CCMT 0602.. Ø 12 mm Length 150 mm |
 | SNR0012M11 SNR0012M11 Inner hole turning tool 12mm × 125mm Minimum processing aperture:15mm Blade used:11IR Screw: M2.5×6 wren:T8 Direction: internal thread right hand arbor |