
Part of the NiteSafe Range
The Duo is our simple, easy-to-use entry-level model, ideal for everyday night lighting and emergency backup.
Supplied with an induction charging base that plugs directly into a wall socket. Designed to remain in the cradle when not in use.
The side sliding switch lets you choose between two lighting modes - or turn the unit off completely.
Front LEDs activate in low or dark light when motion is detected
Light stays on for approximately 20 seconds (±5 seconds)
Turns off until motion is detected again
Brightness: 20 lumens
Sensor distance: 3–4 metres
Sensor range: 100°
Front LEDs turn on automatically in dusk or darkness
Remain on continuously until daylight returns
Brightness: 1 lumen
Disables all features
Turns off night light, motion sensor, and power failure mode
When the torch is seated in the cradle:
Top LEDs automatically activate if power is no longer detected
Also activates if the wall socket is switched off
Provides up to 2 hours of light on a full charge
⚠️ Power cut detection only works when:
The torch is charged
Correctly seated in the cradle
Plugged in with the wall socket switched on
Remove from the cradle at any time:
Top LEDs turn on automatically
Remains on until charge runs out
Provides up to 2 hours of light
The night light activates automatically when ambient light levels drop below natural daylight.
Shadows, object placement, or socket position may cause activation.
The torch does not use smart or time-based technology - it operates purely on light levels.
There is no manual override for the light sensor feature (unless the switch is set to the middle “Off” position).
Ideal for hallways, stairs, bedrooms, and general emergency preparedness.