Edelbrock part #7102 Performer RPM Camshaft is designed for 1957-1986
small-block Chevy 283-400 V-8 applications. This Edelbrock cam kit
produced 410 HP & 408 ft-lbs. of torque when used with #7501 intake
and #60899 cylinder heads on a 350 engine. The camshaft works well with
high-performance's street applications, Performer RPM cams provide power
from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched
to Performer RPM manifolds for high-rpm horsepower while still
maintaining acceptable low-end torque. With 10 to 12 inches of manifold
vacuum at idle, Performer RPM cams have more lift and duration than most
street camshafts. Hydraulic flat tappet lifters are included with each
Performer RPM camshaft. Camshaft Specifications: - Duration @ .050
Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @
Valve Intake: .488" - Lift @ Valve Exhaust: .510" - Lobe Separation: 112
Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's:
11"
