Downstream Oxygen Sensor 2344906 For Nissan Frontier 13-19 4.0L Rogue 14-19 2.5L

Product Description

Specification:
Condition:100% Brand New And High Quality
Position: Downstream
Manufacturer Part Number: 226A0-9BF0B
Interchange Part Number: 234-4906 
Connector Gender Male
Mounting Type Threaded
Sensor Type Heated
Thread Diameter 0.708 (IN)
Wire Harness Length 11.46 (IN)
Vehicle Fitment:

For

Infiniti QX60 2014-2017 Base, Comfort, Premium 4 Cyl 2.5L QR25DER
Nissan Frontier 2013-2019 PRO-4X, S, SL, SV 6 Cyl 4.0L VQ40DE
Nissan Murano 2016 Platinum, SL, SV 4 Cyl 2.5L QR25DER
Nissan Pathfinder 2014 Platinum, SL, SV 4 Cyl 2.5L QR25DER
Nissan Rogue 2014-2019 S, SL, SL/Premium, SV, SV Premium 4 Cyl 2.5L QR25DE
Nissan Xterra 2013-2015 Base Camp, Off-Road, PRO-4X, S, X 6 Cyl 4.0L VQ40DE


Package Include:
1Pcs Oxygen Sensor

Note:
Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.




Q&A

Q:Why does the oxygen sensor have false alarm, after installation ?

A:The clearing of the errors can be obtained on most systems when the vehicle battery is disconnected for at least 60 seconds. The assignment of the new sensor parameters is done automatically when the errors are cleared, but in some systems a short adapting tour is required. In this case the vehicle has to be driven on the road for some 10-15 minutes, in order to have the ECU adapt itself to the new sensor.

Q:How do I know the O2 sensor is good or not ?

A:The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.

Q:How should I install oxygen sensor ?

A:The following is the installation instructions: Use the correct part number as listed in the application catalogue ,Do not use sensor if i has been dropped ,Remove protection cap just prior to installation;

Firstly install sensor body ensuring lead wire is not twisted or bent , Do not use impact wrench or socket type wrench to install sensor ,M18 sensors - install finger tight then 1/2-3/4 turn with a wrench (35-45Nm) ;

Then connect and route lead wire as originally installed , Do not allow lead wire to touch exhaust manifold or any other hot component ,Do not apply any substances (especially oil or grease) to connector sensor ,Do not use leaded fuels,silicone or metal based additives.

Q:When should replace the oxygen sensor?

A:Oxygen Sensor Failure Symptoms:

Reduced fuel mileage
Failed emissions testing
A check engine light
Poor drive-ability

Symptoms of a Bad Oxygen Sensor
#1 – Check engine light on check , Code checker identifying O2 sensor failure .
You can diagnose the problem yourself if you have access to the right tools OBD2 diagnostic tool. O2 Sensor Codes include P0030, P0031, P0036, P0037, P0130, P0131, P0132, P0133, P0134, and P0135.
#2 – A rotten egg odor emitting from the exhaust.
#3 – A reduction in fuel economy.
#4 – Your catalytic converter fails unexpectedly.
#5 – Exhaust emissions reach undesirable levels.
#6 – Your engine surges, hesitates, skips and bucks.

1. We ship to WORLDWIDE.
2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.
3. We will send item to your Confirmed Shipping Address in eBay only. Please confirm your order and address before you bid or pay the item.

4. Usually the standard service delivery takes 15-20 working days (except weekends and holidays),If you don't receive the item in time, please contact us freely, we'll try our best to solve the delivery problem.

5.International Buyers Please Note:
1) Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
2) It's the buyer's responsibility to complete clearance when parcel reached your Customs.We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand.
6. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
7. Any further queries, please don't hesitate to email us. Thank you.

  • Please contact us firstly when you need warranty service.
  • In case an item arrives faulty, please contact us in 30 days and keep it unused.
  • We will instruct you on how to return and get refund or replacement.
  • If after 30 days, or the item has been used, we have the right to decline your claim.
  • Items should be returned on buyers' cost for repair or replacement.
  • Customer Service got fired if they don't work things out with you, so knock their door at will.If any question came in mind, please felt free to contact us through Messages. From Mondy to Saturday, We will respond in 24 hours. There shall be nothing to worry about as we have confidence to solve your issue. 
  • For a presumably defective product received, this one would be a bit tricky. Please tell us where the problem occurs, and our Customer Service and Technical Department will work it through with you. Pictures and videos can come in handy here.
  • * For any confusing or false description in the listing that causes a mis-purchase, please kindly remind us so we can improve our listings and continuously offer a better purchasing experience to you and to all our customers as well. Did it occur to be our mistake for the faulty transaction, we would be responsible for the return cost.
  • We wish you understand the pressures here, and our effort will always come to your aid.


Copyright © 2023 Dianxiaomi