ET825 LCD Digital Electromagnetic Radiation Meter Wave Alarm For Phone Home
Popular
Product Introduction
Product Feature:
1. One machine can be used for two purposes, and electric field and magnetic field radiation can be detected at the same time;
2. Audible and visual alarm, automatic alarm when exceeding the safety value;
3. Data locking, one key locking of radiation value;
4. LCD graphic display of radiation value trend;
5. Radiation assessment, to remind you whether the current radiation value is safe;
6. The appearance is fashionable, easy to operate with one hand, convenient for moving or on-site measurement.
Product parameters:
Model: ET825
Material: ABS
Color: black
Precision: electric field: 1 V/m; Magnetic field: 0.01 μ T
Range: electric field: 1-1999 V/m; Magnetic field: 0.01 uT-19.99 uT
Reading display: 3-1/2 digit LCD
Alarm threshold: electric field: 40 V/m; Magnetic field: 0.4uT
Test bandwidth: 5Hz-3500 MHz
Test mode: dual module synchronous test
Operating temperature: 0~50 ℃/30 ℉~122 ℉
Humidity: relative humidity<80%
Power supply: 3 * 1.5V AAA battery (shipped without battery)
Operating instructions:
1. Press the power on key to start the machine. After full screen display, the current electric field and magnetic field values can be displayed. Briefly press the power on key to turn on the backlight. The screen displays the "On" symbol. Briefly press again to turn off the backlight. Without any key operation, the backlight will turn off after 30 seconds. After starting the machine, long press the power on key to turn it off. Without any key operation, the instrument will shut down after 5 minutes. ※ Note: Since the environment may have electromagnetic interference, the instrument may have a small reading when it is turned on. It is not that the instrument is faulty.
2. For handheld instrument, the front end sensing area is slowly approaching the electromagnetic radiation source to be measured. If the actual radiation value is within the technical indicators of the instrument, the instrument will have a numerical display; If the instrument has no reading, it means that the electromagnetic radiation value of the radiation source is less than the minimum reading of the machine 1V/m or 0.01 μ T。※ Note: For high-voltage facilities, remote measurement is enough, and pay attention to safety.
3. During the measurement, press the HOLD key to lock the instrument reading, and the screen will display the "HOLD" symbol. If it is not necessary to lock, press the HOLD key again. The computer screen displays the "sound" symbol, and long press the BEEP key
Sing.
4. Press AVG/VPP key to switch between average value and peak value in turn when there is no lock during measurement.
5. When the digital display is not clear or the number flashes and cannot be reset to zero, it indicates that the battery is low. Please replace the battery in time.
Scope of application:
Electromagnetic radiation monitoring: effect inspection of protective equipment such as home, office, outdoor, industrial places, mobile phones, computers, televisions, refrigerators, high-voltage lines, radiation suits, radiation protection films, etc
Package list:
Electromagnetic radiation tester * 1
instructions * 1
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
ET825 LCD Digital Electromagnetic Radiation Meter Wave Alarm For Phone Home
Product Introduction
Product Feature:
1. One machine can be used for two purposes, and electric field and magnetic field radiation can be detected at the same time;
2. Audible and visual alarm, automatic alarm when exceeding the safety value;
3. Data locking, one key locking of radiation value;
4. LCD graphic display of radiation value trend;
5. Radiation assessment, to remind you whether the current radiation value is safe;
6. The appearance is fashionable, easy to operate with one hand, convenient for moving or on-site measurement.
Product parameters:
Model: ET825
Material: ABS
Color: black
Precision: electric field: 1 V/m; Magnetic field: 0.01 μ T
Range: electric field: 1-1999 V/m; Magnetic field: 0.01 uT-19.99 uT
Reading display: 3-1/2 digit LCD
Alarm threshold: electric field: 40 V/m; Magnetic field: 0.4uT
Test bandwidth: 5Hz-3500 MHz
Test mode: dual module synchronous test
Operating temperature: 0~50 ℃/30 ℉~122 ℉
Humidity: relative humidity<80%
Power supply: 3 * 1.5V AAA battery (shipped without battery)
Operating instructions:
1. Press the power on key to start the machine. After full screen display, the current electric field and magnetic field values can be displayed. Briefly press the power on key to turn on the backlight. The screen displays the "On" symbol. Briefly press again to turn off the backlight. Without any key operation, the backlight will turn off after 30 seconds. After starting the machine, long press the power on key to turn it off. Without any key operation, the instrument will shut down after 5 minutes. ※ Note: Since the environment may have electromagnetic interference, the instrument may have a small reading when it is turned on. It is not that the instrument is faulty.
2. For handheld instrument, the front end sensing area is slowly approaching the electromagnetic radiation source to be measured. If the actual radiation value is within the technical indicators of the instrument, the instrument will have a numerical display; If the instrument has no reading, it means that the electromagnetic radiation value of the radiation source is less than the minimum reading of the machine 1V/m or 0.01 μ T。※ Note: For high-voltage facilities, remote measurement is enough, and pay attention to safety.
3. During the measurement, press the HOLD key to lock the instrument reading, and the screen will display the "HOLD" symbol. If it is not necessary to lock, press the HOLD key again. The computer screen displays the "sound" symbol, and long press the BEEP key
Sing.
4. Press AVG/VPP key to switch between average value and peak value in turn when there is no lock during measurement.
5. When the digital display is not clear or the number flashes and cannot be reset to zero, it indicates that the battery is low. Please replace the battery in time.
Scope of application:
Electromagnetic radiation monitoring: effect inspection of protective equipment such as home, office, outdoor, industrial places, mobile phones, computers, televisions, refrigerators, high-voltage lines, radiation suits, radiation protection films, etc
Package list:
Electromagnetic radiation tester * 1
instructions * 1
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.