• Compatibility:
  •  
  • Ford Crown Victoria 2000-2002 Ford Grand Marquis 2000-2002 Ford Thunderbird 2002 Jaguar S-Type 2000-2002 Lincoln LS 2000-2002 Lincoln LS 2000-2002 Lincoln Town Car 2000-2002 Mercury Grand Marquis 2000-2002
  •  
  •  
  • About the mass air flow (MAF) sensor:
  •  
  • * What does a MAF Sensor do? The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.
  • * Where are these sensors located? The Mass Air Flow sensor is located in the intake ducting after the air filter.
  • Mass Air Flow Sensor MAF For 2000-2002 Mercury Grand Marquis Ford Crown Victoria

    Compatibility:

     

    Ford Crown Victoria 2000-2002
    Ford Grand Marquis 2000-2002
    Ford Thunderbird 2002
    Jaguar S-Type 2000-2002
    Lincoln LS 2000-2002
    Lincoln LS 2000-2002
    Lincoln Town Car 2000-2002
    Mercury Grand Marquis 2000-2002

     

     

    About the mass air flow (MAF) sensor:

     

    * What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    * Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    * Installing the replacement MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. Carefully plug the harness connector lead into the MAF sensor.

     

    Packaging:

     

    1x Mass Air Flow Sensor/Meter



    content_src_url





     

    1.We only accept Payoneer.

    2. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

     

    1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.

     

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

     

     

    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Seller.

     

     

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

     

    Shop Category
    Mass Air Flow Sensor MAF For 2000-2002 Mercury Grand Marquis Ford Crown Victoria

    Compatibility:

     

    Ford Crown Victoria 2000-2002
    Ford Grand Marquis 2000-2002
    Ford Thunderbird 2002
    Jaguar S-Type 2000-2002
    Lincoln LS 2000-2002
    Lincoln LS 2000-2002
    Lincoln Town Car 2000-2002
    Mercury Grand Marquis 2000-2002

     

     

    About the mass air flow (MAF) sensor:

     

    * What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    * Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    * Installing the replacement MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. Carefully plug the harness connector lead into the MAF sensor.

     

    Packaging:

     

    1x Mass Air Flow Sensor/Meter


     

    1.We only accept Payoneer.

    2. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

     

    1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    4.Payment must be received within 10 days as auction ended or order might be delayed.

     

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

     

     

    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Seller.

     

     

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

     


    Copyright of Top-liftsupport. All rights reserved.