














Specifications:
• Input Voltage: 100-240V AC, 50-60Hz
• Rated Output: 12V 6A
• Minimum Start Voltage: 2.0V
• Battery Capacity Range: 6-100Ah
• Thermal Protection: 65°C / -5°C
• Efficiency: Approximately 95%
• Switch mode technology: Yes
• Polarity protection: Yes
• Output short circuit protection: Yes
• Non-battery connection protection: Yes
• Overvoltage protection: Yes
• Overtemperature protection: Yes
• Cooling Method: Fan
Features:
• Microprocessor control (CPU)
• Three-stage automatic charging: A fully automatic battery charger with three charging stages.
Three-stage charger suitable for most battery types, including calcium batteries, GEL batteries, AGM batteries, lithium iron phosphate batteries, and wet batteries. It can also help restore depleted and sulfated batteries.
• Battery Types: Most types of lead-acid batteries, including calcium batteries, GEL batteries, AGM batteries, lithium iron phosphate batteries, wet batteries, EFB batteries, etc.
Multiple Protection: Built-in circuit protection features prevent reverse connection, sparks, overcharge, overcurrent, open circuit, short circuit, and overheating.
Wide Application: The three-stage charger is suitable for most types of batteries, including calcium batteries, gel batteries, AGM batteries, lithium iron phosphate batteries, and wet batteries. It can also help restore depleted and sulfated batteries. Suitable for cars, trucks, motorcycles, lawnmowers, boats, RVs, SUVs, ATVs, and more.
12V 6Amp: This charger is designed for 12V batteries, supporting wide voltage input of 100-240V, automatically adjusting the charging current, and easily handling various harsh voltage environments.
Battery Maintenance:The car battery charger also functions as a battery maintenance device. Its pulse repair feature can help repair your damaged batteries and extend their lifespan. Note: It cannot activate completely dead batteries or repair severely damaged batteries, nor can it restore batteries to a like-new condition.
How to use:
Before charging:
Check your battery parameters is compatible to the charger.
When charging:
1.Connect the red clamp to the positive pole (+), black clamp to the negative pole (-).
2.Connect the charger with AC power source, the charger will start to operate.
3.Once the battery is fully charged, the battery bar on screen will in “FULL” status.
Charging completed:
Keep the charged status in 1-2 hours is highly recommended, Then, remove the charger.
Note:
1.This Charger is for battery capacity between 6-100Ah. Please check the capacity (AH) of your battery before buying the charger! Thanks!
Package Included:
1 * US Car Battery Charger
1 * User Manual

