An audio digital timer with two AC outlets.
| Features | |
| Time display | Digital display with fluorescent display tube |
| Timer type | 24-hour type (AM/PM, 12-hour display) |
| Timer setting | Only one ON/OFF time setting in mininum units of minutes within a 24-hour period |
| Sleep timer | Setting in minimum units of minutes up to 1 hour 59 mins |
| Time accuracy | Synchronized with line frequency |
| Timer accuracy | Within ± 0.1 sec. of time displayed |
| Sleep timer accuracy | Within 59 sec. of set time |
Versions/Power requirements
US / 120 V AC 60 Hz
Canada / 120 V AC 60 Hz
Europe / 220 V AC 50 Hz
UK / 240 V AC 50 Hz
Multi-voltage / 110, 120, 220, 240 V AC (voltage selector) 50/60 Hz (frequency switch)
Power consumption 6 W
Commutatori AC outlet off/on/timer - Time adjust: sec reset/rev/fast/slow - display frontale - commutatore sleep/timer set on/off/ clock/second/clock reset - consumo 6 watt.
Made in Japan.
A stereo hi-fi FM/AM tuner. Line Output lead with phono plugs.
| Specification | |
| FM Tuner section | |
| Usable Sensitivity | 10.8dBf (1.9µV) |
| Signal-to-Noise Ratio (at 85dBf) | MONO 78dB, STEREO 75dB |
| Distortion (at 65dBf) | MONO 1kHz; 0.08%, STEREO 1kHz; 0.15% |
| Alt. Channel Selectivity (400kHz) | 60dB |
| Frequency Response | 20Hz - 15kHz, +0.2dB,-1dB |
| Antenna Input | 300Ω balanced, 75Ω unbalanced |
| AM Tuner section | |
| Sensitivity | |
| IHF ferrite antenna IHF external antenna |
300µV/m 30µV |
| Selectivity | 25dB |
| Antenna | Ferrite loopstick antenna |
| Output | |
| Output (Level/Impedance) | |
| FM (100% MOD) AM (30% MOD) |
650mV/1kΩ 150mV |
Versions/Power Requirements
(KU) U.S.A. model / 120V only
(S) General export model / 110V, 120V, 220V and 240V (Switchable)
(S/G) U.S. Military model / 110V, 120V, 220V and 240V (Switchable)
(HE) Europe model / 220V and 240V (Switchable)
(YP) Australia model / 240V only
(H/WG) West Germany / 220V and 240V (Switchable)
Power consumption: 16 W
indicatore di segnale con 5 led verdi - led rosso ricezione stereo - display frontale con digit blu - commutatore fm mode: auto/mono - commutatore fm local - memory - commutatore AM/FM - sensibilità: 1.9µV (FM), 300µV (MW) - signal to Noise Ratio: 75dB (FM), 50dB (MW) - distorsione: 0.15% (FM) - selettività: 60dB (FM), 25dB (MW) - risposta in frequenza: 20Hz to 15kHz (FM) - uscita: 650mV (FM), 150mV (MW) - consumo 16 watt - antenna esterna girevole sul retro in ferrite.
Made in Belgium.
A hi-fi stereo integrated amplifier housed in a metal case with silver front with a digital power meter display, with continuous power output of 65 watts per channel into 8 ohms 20-20,000Hz THD 0.03%.
Integrierter Stereo-Verstärker mit 2 x 78 Watt Sinus an 8 Ohm (DIN). Gehäuse Silber-Metallic.
| Specification | |
| Continuous power output | 65 Watts per channel, min. into 8Ω from 20Hz—20,000Hz with no more than 0.03% THD |
| Continuous Power Output at 1kHz (both channels driven) THD 0.01%, 8Ω |
70 watts per channel |
| Total Harmonic Distortion (20Hz — 20kHz, 8Ω, from AUX) 32.5 Watts per channel |
No more than 0.02% |
| Intermodulation Distortion (8Ω, from AUX) |
|
| continuous rated power output 32.5 watts per channel power output |
No more than 0.03% No more than 0.02% |
| Damping Factor (20Hz — 20kHz, 8Ω) | 50 |
| Input (Sensitivity/Impedance) | |
| PHONO TUNER AUX TAPE PLAY 1, 2/ADAPTOR |
2.5mV/50kΩ 150mV/50kΩ 150mV/50kΩ 150mV/50kΩ |
| Output (Level) | |
| TAPE REC 1, 2/ADAPTOR Speaker |
150mV A, B, OFF |
| Frequency Response | |
| PHONO (RIAA Equalization) TUNER, AUX, TAPE PLAY 1, 2/ADAPTOR |
20Hz — 20kHz ±0.3dB 10Hz — 70kHz +0,-2dB |
| Subsonic Filter | 15Hz (-6dB/oct) |
| Hum and Noise (IHF, short-circuited, A network) |
|
| PHONO TUNER, AUX, TAPE PLAY 1, 2/ADAPTOR |
84dB 103dB |
| Hum and Noise (DIN, continuous Power/50mW) |
|
| PHONO TUNER, AUX, TAPE PLAY 1, 2/ADAPTOR |
71dB/62dB 88dB/62dB |
Versions/Power requirements
| KU | USA | 120V AC 60Hz |
| HE | Europe | 220/240V AC 50/60Hz switchable |
| HB | UK | 220/240V AC 50/60Hz switchable |
| YP | Australia | 240V AC 50/60Hz |
| S | General | 110/120V/220/240V AC 50/60Hz with voltage selector |
| S/G | US Military | 110/120V/220/240V AC 50/60Hz with voltage selector |
Power consumption: 340 watts (HE, HB, YP), 130 watts (KU, S, SG)
Type: 2-head, single compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.8 cm/s
Heads: 1 x record/playback, 1 x erase
Tape Type: type I, CrO2, Metal
Noise Reduction: B
Input: 300mV (line), 0.1mV (mic)
Output: 0.44V (line)
Finish: silver
Year: 1981
Output Level: 1V
Gain: ± 0dB
Signal to Noise Ratio: 100dB
Total harmonic distortion: 0.005%
Control Range: ± 10dB
Frequency Bands: 60, 150, 400, 1K, 2.4K, 6K, 15KHz
Dimensions: 420 x 92 x 240mm
Weight: 3kg
Year: 1981