Descriptions:
Widely used in: thread repair
Features: overall quenching hardness is stable, tapping thread is sharp and hard, precision alloy steel material
Strong toughness, not easy to break teeth, long service life
Purpose/How to use
Die is used for tapping external threads, the diameter of the bar should be selected before tapping, the winch, the cutting lubricating oil, the diameter of the bar is very important, it should not be greater than the nominal diameter of the required thread, it should be less than the nominal diameter of about 005-0.15, the diameter is too large, It is easy to cause difficulty in cutting and cause damage to the die. A slightly smaller diameter is conducive to tapping the thread, and maintain a sufficient thread height. Load the end face of the die with the cutting cone up into the winch, and the positioning groove of the die should be the middle of the quasi-winch. The fastening screw, the screw is stuck into the socket of the plate and tightened. The end of the bar should have a 1 * 45 ° chamfer, but the chamfer should not be too large. The excessive chamfer is not easy to cut in. When tapping the thread, the cutting cone of the die is aligned with the bar, and try to keep the two coaxial.
Features: overall quenching hardness is stable, tapping thread is sharp and hard, precision alloy steel material
Strong toughness, not easy to break teeth, long service life
Purpose/How to use
Die is used for tapping external threads, the diameter of the bar should be selected before tapping, the winch, the cutting lubricating oil, the diameter of the bar is very important, it should not be greater than the nominal diameter of the required thread, it should be less than the nominal diameter of about 005-0.15, the diameter is too large, It is easy to cause difficulty in cutting and cause damage to the die. A slightly smaller diameter is conducive to tapping the thread, and maintain a sufficient thread height. Load the end face of the die with the cutting cone up into the winch, and the positioning groove of the die should be the middle of the quasi-winch. The fastening screw, the screw is stuck into the socket of the plate and tightened. The end of the bar should have a 1 * 45 ° chamfer, but the chamfer should not be too large. The excessive chamfer is not easy to cut in. When tapping the thread, the cutting cone of the die is aligned with the bar, and try to keep the two coaxial.
Package include: According to your choice.
Payment:
PayPal, PayPal Credit, MasterCard, Apple Pay, Google Pay...are all supported.
Shipping:
Please make sure your address 100% right.
Return Policy:
If you are not satisfied with the item,any problem,please contact with us before you give a negative feedback,because it doesn't help you at all.we will try our best to help you solve the problems.
Feedback:
Your satisfaction is very important for us.If you are satisfied with our item or service,please give us a positive feedback and 5-Star DSRs rating.
Contact Us:
We are very glad to help you,please feel free to contact us whatever any problems.Due to high volume of daily incoming emails and time zone difference,please allow 24 hours for us to reply.
About Item:
For the funcitonal products in our shop,we make sure that the functions are the same as description,but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.Please be advised before you bid.
