Car LED Controller Light Relay Harness Dimmer On/Off Fog Light Controller 12-18V
Popular
Product Introduction
Features:
1. The product is mini in appearance, designed with ABS shell, and is light in weight.
2. Widely used, suitable for all brands of cars.
3. The product has stable performance and comes with dimming and delay function.
4. The product is easy to install and can be used without replacing any wires.
5. Intelligent start: When the engine starts, the daytime running lights automatically light up; when the engine is turned off, the daytime running lights delay for 15 seconds and go out.
1. The product is mini in appearance, designed with ABS shell, and is light in weight.
2. Widely used, suitable for all brands of cars.
3. The product has stable performance and comes with dimming and delay function.
4. The product is easy to install and can be used without replacing any wires.
5. Intelligent start: When the engine starts, the daytime running lights automatically light up; when the engine is turned off, the daytime running lights delay for 15 seconds and go out.
Product parameters:
Product voltage: 12-18V
Working current: 5A
Model SK-CD0103: 1. Delay function 2. Headlights on, daytime running lights dimmed
Model SK-CD0105: 1. Delay function 2. Headlights on, daytime running lights off
Product voltage: 12-18V
Working current: 5A
Model SK-CD0103: 1. Delay function 2. Headlights on, daytime running lights dimmed
Model SK-CD0105: 1. Delay function 2. Headlights on, daytime running lights off
Product Description:
1. This is an intelligent LED daytime running light hawk eye light controller, which is always on + dimming + delay + automatic switch. When the car is started (voltage must be higher than 13V+), the daytime running light will automatically turn on. When the light (or reading light) is turned on, the daytime running light dims (darkens). When the car is turned off (voltage must be lower than 12.5V), the daytime running light delays for 15 seconds and then turns off.
2. The starting voltage is 13V+, the flameout voltage is lower than 12.5V (if it is higher than this value, it will take a few minutes until the voltage drops to turn off the light), and the total power of a pair of daytime running lights does not exceed 18W (the total power of most daytime running lights is It will not exceed). After just connecting the battery, it is normal for the daytime running lights to turn on for about 15 seconds and then turn off (to achieve the delay function). After that, you need to start the car and start working when the voltage reaches 13V+.
3. Intelligent work: When the car engine is started and the voltage reaches 13V+, the daytime running lights will automatically turn on. When the car is turned off and the voltage is lower than 12.5V (not suitable for cars with a voltage higher than 12.5V after the car is turned off), the daytime running lights will be delayed. The lights will automatically turn off after 15 seconds, making it easier for lighting car owners to go home and realize the delayed lights-off function.
1. This is an intelligent LED daytime running light hawk eye light controller, which is always on + dimming + delay + automatic switch. When the car is started (voltage must be higher than 13V+), the daytime running light will automatically turn on. When the light (or reading light) is turned on, the daytime running light dims (darkens). When the car is turned off (voltage must be lower than 12.5V), the daytime running light delays for 15 seconds and then turns off.
2. The starting voltage is 13V+, the flameout voltage is lower than 12.5V (if it is higher than this value, it will take a few minutes until the voltage drops to turn off the light), and the total power of a pair of daytime running lights does not exceed 18W (the total power of most daytime running lights is It will not exceed). After just connecting the battery, it is normal for the daytime running lights to turn on for about 15 seconds and then turn off (to achieve the delay function). After that, you need to start the car and start working when the voltage reaches 13V+.
3. Intelligent work: When the car engine is started and the voltage reaches 13V+, the daytime running lights will automatically turn on. When the car is turned off and the voltage is lower than 12.5V (not suitable for cars with a voltage higher than 12.5V after the car is turned off), the daytime running lights will be delayed. The lights will automatically turn off after 15 seconds, making it easier for lighting car owners to go home and realize the delayed lights-off function.
Wiring:
1. First connect the positive and negative poles of the left and right daytime running lights.
2. Connect the red and black wires at the input terminal with the fuse on the controller to the positive and negative terminals of the battery, and connect the red and black wires at the output terminal to the positive and negative terminals of the daytime running light.
3. Connect the yellow wire on the controller to the positive pole of the headlight (or reading light) switch. When the headlight (or reading light) is turned on, the brightness of the daytime running light will be halved (darkened) to achieve the dimming function (yellow wire You can choose not to answer it, which means giving up this function and not affecting other uses).
1. First connect the positive and negative poles of the left and right daytime running lights.
2. Connect the red and black wires at the input terminal with the fuse on the controller to the positive and negative terminals of the battery, and connect the red and black wires at the output terminal to the positive and negative terminals of the daytime running light.
3. Connect the yellow wire on the controller to the positive pole of the headlight (or reading light) switch. When the headlight (or reading light) is turned on, the brightness of the daytime running light will be halved (darkened) to achieve the dimming function (yellow wire You can choose not to answer it, which means giving up this function and not affecting other uses).
Shipping list:
1*Controller
1*Controller
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Car LED Controller Light Relay Harness Dimmer On/Off Fog Light Controller 12-18V
Product Introduction
Features:
1. The product is mini in appearance, designed with ABS shell, and is light in weight.
2. Widely used, suitable for all brands of cars.
3. The product has stable performance and comes with dimming and delay function.
4. The product is easy to install and can be used without replacing any wires.
5. Intelligent start: When the engine starts, the daytime running lights automatically light up; when the engine is turned off, the daytime running lights delay for 15 seconds and go out.
1. The product is mini in appearance, designed with ABS shell, and is light in weight.
2. Widely used, suitable for all brands of cars.
3. The product has stable performance and comes with dimming and delay function.
4. The product is easy to install and can be used without replacing any wires.
5. Intelligent start: When the engine starts, the daytime running lights automatically light up; when the engine is turned off, the daytime running lights delay for 15 seconds and go out.
Product parameters:
Product voltage: 12-18V
Working current: 5A
Model SK-CD0103: 1. Delay function 2. Headlights on, daytime running lights dimmed
Model SK-CD0105: 1. Delay function 2. Headlights on, daytime running lights off
Product voltage: 12-18V
Working current: 5A
Model SK-CD0103: 1. Delay function 2. Headlights on, daytime running lights dimmed
Model SK-CD0105: 1. Delay function 2. Headlights on, daytime running lights off
Product Description:
1. This is an intelligent LED daytime running light hawk eye light controller, which is always on + dimming + delay + automatic switch. When the car is started (voltage must be higher than 13V+), the daytime running light will automatically turn on. When the light (or reading light) is turned on, the daytime running light dims (darkens). When the car is turned off (voltage must be lower than 12.5V), the daytime running light delays for 15 seconds and then turns off.
2. The starting voltage is 13V+, the flameout voltage is lower than 12.5V (if it is higher than this value, it will take a few minutes until the voltage drops to turn off the light), and the total power of a pair of daytime running lights does not exceed 18W (the total power of most daytime running lights is It will not exceed). After just connecting the battery, it is normal for the daytime running lights to turn on for about 15 seconds and then turn off (to achieve the delay function). After that, you need to start the car and start working when the voltage reaches 13V+.
3. Intelligent work: When the car engine is started and the voltage reaches 13V+, the daytime running lights will automatically turn on. When the car is turned off and the voltage is lower than 12.5V (not suitable for cars with a voltage higher than 12.5V after the car is turned off), the daytime running lights will be delayed. The lights will automatically turn off after 15 seconds, making it easier for lighting car owners to go home and realize the delayed lights-off function.
1. This is an intelligent LED daytime running light hawk eye light controller, which is always on + dimming + delay + automatic switch. When the car is started (voltage must be higher than 13V+), the daytime running light will automatically turn on. When the light (or reading light) is turned on, the daytime running light dims (darkens). When the car is turned off (voltage must be lower than 12.5V), the daytime running light delays for 15 seconds and then turns off.
2. The starting voltage is 13V+, the flameout voltage is lower than 12.5V (if it is higher than this value, it will take a few minutes until the voltage drops to turn off the light), and the total power of a pair of daytime running lights does not exceed 18W (the total power of most daytime running lights is It will not exceed). After just connecting the battery, it is normal for the daytime running lights to turn on for about 15 seconds and then turn off (to achieve the delay function). After that, you need to start the car and start working when the voltage reaches 13V+.
3. Intelligent work: When the car engine is started and the voltage reaches 13V+, the daytime running lights will automatically turn on. When the car is turned off and the voltage is lower than 12.5V (not suitable for cars with a voltage higher than 12.5V after the car is turned off), the daytime running lights will be delayed. The lights will automatically turn off after 15 seconds, making it easier for lighting car owners to go home and realize the delayed lights-off function.
Wiring:
1. First connect the positive and negative poles of the left and right daytime running lights.
2. Connect the red and black wires at the input terminal with the fuse on the controller to the positive and negative terminals of the battery, and connect the red and black wires at the output terminal to the positive and negative terminals of the daytime running light.
3. Connect the yellow wire on the controller to the positive pole of the headlight (or reading light) switch. When the headlight (or reading light) is turned on, the brightness of the daytime running light will be halved (darkened) to achieve the dimming function (yellow wire You can choose not to answer it, which means giving up this function and not affecting other uses).
1. First connect the positive and negative poles of the left and right daytime running lights.
2. Connect the red and black wires at the input terminal with the fuse on the controller to the positive and negative terminals of the battery, and connect the red and black wires at the output terminal to the positive and negative terminals of the daytime running light.
3. Connect the yellow wire on the controller to the positive pole of the headlight (or reading light) switch. When the headlight (or reading light) is turned on, the brightness of the daytime running light will be halved (darkened) to achieve the dimming function (yellow wire You can choose not to answer it, which means giving up this function and not affecting other uses).
Shipping list:
1*Controller
1*Controller
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.