Flair SE5a model - Laser-cut rib set & primary fuselage formers

Note: This set is not a complete kit. A plan is not included, and additional materials are required to complete the model.

SE5a. Scale WWI Fighter for radio control. Scale is 1/6, for .40 to .60 size engines. This is an after-market rib set to suit the Flair SE5a - they are not OEM parts.

Model specification:

• Brand:              Flair Models - Scout series
• Type:                RC scale model
• Wing Span:      51"
• Weight:             6-6.5 lbs     2.7 - 3Kg
• Engine:            .40 -.50 4 stroke 
• Electric:            4Max PO-5055-595 Brushless out-runner                            4M-HESC80AV2 80amp ESC                            PPL-60C4S-3700 mAh 60c Lipo                            APCE 14x10 Prop

The box contains the following 93 laser-cut parts

• 51 Ribs & riblets and parts in 2.4mm balsa
• 4 Dihedral braces in 1.5mm aircraft ply.
• 12 wing strut ribets in 1.5mm aircraft ply
• 16 wing strut horns in 1.5mm aircraft ply
• Ribs are cut with a small 'vent' hole to alleviate the 'ballooning' issue when film covering.
• Ribs are cut with ‘pop-out’ servo wire holes and are also marked with the original single servo pushrod positions

• 13 x primary fuselage formers cut in 3mm lite ply
• 2 lower half outside fuselage sides cut in 3mm lite ply
• 2 lower halves inside fuselage sides cut in 1.5mm aircraft ply
• 1 fuselage bottom air-vent cover (not shown in photo) cut in 3.0mm liteply

• For clarity, photo 2 shows ribs for one wing only.
• No plan included. This is not a complete kit

The plan for this model can be purchased via this direct link: https://www.ebay.co.uk/itm/156129385302

WW1 Cowls, Engines, Wheels, Pilots And Guns. To Suit Flair Scout Kits can be found: https://www.ebay.co.uk/str/inwoodmodels

You can also view all models in our eBay store at www.ebay.co.uk/str/skyhighrc

Please read the rest of the description below carefully as this is not a complete kit.

• The box contains laser-cut ribs/parts only.
• This is not a complete model kit.
• Additional materials will be required to complete the model.
• All photos are for illustration purposes only.
• Photos 2 to 3 of laser-cut parts show exactly what you will receive in the box
• Building plans are not included
• Plans can be obtained from https://model-plans.co.uk/