eBay

'Flair Puppeteer' ~ Laser-cut parts set

This is Not a full kit, no plan is included and additional materials will be required to finish the model.

A lightly loaded Bi-plane based on the Sopwith Pup with four ailerons responds well to low-speed aerobatics.

This is an after-market rib set to suit the Flair Puppeteer - they are not OEM parts.

Unlike the originals, ribs are cut to suit their locations for ailerons, there is no trimming required!

Photos & build thread of similar model courtesy of Andy Green: https://www.andy-green.co.uk/pup/

Model specification:

Brand: Flair Models - Scout series
Type: RC scale model - 3/4 channel
Wing Span: 58"
Weight: 3.6Kg
Engine: .60 -.90 4 stroke

The box contains the following 100 laser-cut parts

55 Ribs laser-cut in hand-selected 2.4mm balsa
25 gussets cut in 2.4mm blasa
4 Dihedral braces in 3.0mm lite ply.
8 assorted parts cut in 3mm lite ply
4 Fuselarge sides (to be laminated to 6mm) cut in 3mm Liteply
4 main fuselage formers (F1 to be laminated to 6mm) cut in 3mm Liteply
Ribs are cut with a small 'vent' hole to alleviate the 'ballooning' issue when film covering.
Ribs are cut with ‘pop-out’ servo wire holes
No plan included. This is not a complete kit

The plan for this model can be purchased via this link: https://www.ebay.co.uk/itm/156422099332

Full build thread: https://forums.m odelflying.co.uk/index.php?/topic/21271-flair-puppeteer/#comments

WW1 Cowls, Engines, Wheels, Pilots And Guns. To Suit Flair Scout Kits can be found: https://www.ebay.co.uk/str/inwoodmodels

You can also view all models in our eBay store at www.ebay.co.uk/str/skyhighrc

Please note:

The box contains laser-cut ribs/parts only.
This is not a complete model kit.
Additional materials will be required to complete the model.
All photos are for illustration purposes only.
Building plans are not included
Plans can be obtained from https://model-plans.co.uk/

We have over 200 quality model rib sets/parts available, please have a browse through all our eBay listings / latest news on Face Book @ Sky High RC

Quality laser cut rib sets also available for ...

Veron, Aeromodeller, APS, Graupner, Frog, Mercury, Radio-Modeler, Chris Foss, Carl Goldberg, Vic Smeed, KK, RC Powers, Airtronic’s, Flair, Carl Goldberg, Dave Boddington, iGull, Kamco, Hobby Shack, Sailplanes International, RCM&E

Back ground to Sky High RC can be viewed on our website.