Phase 2 Slope Soarer ~ Laser-cut Rib Set

This is Not a full kit, no plan is included and additional materials will be required to finish the model.

These ribs are drawn/cut to a constant 12% profile thickness along the tapered planform for optimal performance. The plan shows 12% to 13% profile thickness at tip!

Phase 2 Slope Soarer plans are available from Chris Foss website

http://www.chrisfoss.co.uk/#/constructional-plans/4538948935

Model specification:

• Brand:                   Chris Foss
• Type:                     Fully aerobatic RC Slope soarer
• Wing span:            57”

The box contains: (48 laser-cut parts in quality balsa/ply)

• 28 laser-cut ribs cut in hand-selected 1.5mm quality balsa
• (two W2 1/16 ribs laminated to create 1/8 thickness)
• 1 wing rib (W2) cut in 3.0mm (1/8) balsa
• (Wing spars are cut for imperial sizes 1/8 x 3/8)
• 2 fuselage formers (F3 & F4) cut in 3.0mm balsa
• 9 Fuselage formers cut in 1.5mm Aircraft ply 
• 2 laser cut servo plates cut in 1.5mm aircraft ply
• 2 laser cut servo mounts cut in 3mm lite ply
• 1 fuselage former cut in 3mm lite ply
• 1 fuselage nose block core cut in 3.0mm lite ply
• 2 wing braces cut in 3mm lite ply (laminated to make 1/4 brace)
• (F2 is laminated 3.0+1.5 ply instead of original 3/16 balsa original)
• Ribs are cut to suit a 6mm diameter drinking straw servo cable duct.
• No plan included. This is not a complete kit.

Chris Foss plans are available from his website ...

http://www.chrisfoss.co.uk/#/constructional-plans/4538948935

Check out our eBay shop to view all model categories at: www.ebay.co.uk/str/skyhighrc   

Please read the rest of the description below carefully as this is not a complete kit.

• The box contains laser-cut ribs/parts only.
• This is not a complete model kit.
• Additional materials will be required to complete the model.
• All photos are for illustration purposes only.
• Photo 2 of laser-cut parts (green background) shows exactly what you will receive in the box
• Building plans are not included

We have over 200 quality model rib sets/parts available, please have a browse through all our eBay listings / latest news on Face Book @ Sky High RC

Quality laser cut rib sets also available for ...

Veron, Aeromodeller, APS, Graupner, Frog, Mercury, Radio-Modeler, Chris Foss, Carl Goldberg, Vic Smeed, KK, RC Powers, Airtronic’s, Flair, Carl Goldberg, Dave Boddington, iGull, Kamco, Hobby Shack, Sailplanes International, RCM&E

Back ground to Sky High RC can be viewed on our website