Phase 5 Slope Soarer ~ Laser-cut Parts Set

Note: This set is not a complete kit. A plan is not included, and additional materials are required to complete the model.

Build thread https://slopesoaringsussex.blogspot.com/p/chris-foss-phase-5-build-2019.html 

Phase 5 Slope Soarer plans are available from Chris Foss' website

http://www.chrisfoss.co.uk/#/constructional-plans/4538948935

Model specification:

• Brand:                   Chris Foss
• Type:                     Fully aerobatic RC Slope soarer
• Wing span:           73”
• Length:                 46"
• AUW:                     3 lb.
• Wing loading:      12.3 oz/sq/ft.

Box contains: (60 laser-cut ribs in quality balsa)

• 38 laser-cut ribs cut in hand-selected 1.5mm quality balsa
• (for clarity, the picture shows ribs for one wing only)
• 2 laser cut servo plates cut in 1.5mm aircraft ply
• 2 laser cut servo mounts cut in 3mm lite ply
• 2 Wing braces cut in 3mm lite ply
• 3 fuselage Formers cut in 3mm lite ply
• 2 fuselage fin side plates cut in 1.5mm aircraft ply
• 2 elevator bellcranks cut in 1.5mm aircraft ply
• 2 nose block cores cut in 1.5mm aircraft ply
• 3 fuselage formers cut in 1.5mm aircraft ply
• 2 tailplane end ribs cut in 1.5mm aircraft ply
• 2 fuselage wing retaining plates cut in 1.5mm aircraft ply

• Cut for a 4 servo wing but are easily modified for the original 18th-century centre servo!
• The wing is cut for standard 1/2"x1/8" spars rather than the tapered unobtanium versions.
• Ribs are also cut to suit a 6mm diameter drinking straw servo cable duct.
• No plan included. This is not a complete kit.

Chris Foss plans are available from his website ...phone to order.

http://www.chrisfoss.co.uk/#/constructional-plans/4538948935

Check out our eBay shop to view all model categories at: www.ebay.co.uk/str/skyhighrc   

Please read the rest of the description below carefully as this is not a complete kit.

• The box contains laser-cut ribs/parts only.
• This is not a complete model kit.
• Additional materials will be required to complete the model.
• All photos are for illustration purposes only.
• Photos 3 & 3 of laser-cut parts (blue background) show exactly what you will receive in the box
• Building plans are not included

We have over 200 quality model rib sets/parts available, please have a browse through all our eBay listings / latest news on Face Book @ Sky High RC

Quality laser cut rib sets also available for ...

Veron, Aeromodeller, APS, Graupner, Frog, Mercury, Radio-Modeler, Chris Foss, Carl Goldberg, Vic Smeed, KK, RC Powers, Airtronic’s, Flair, Carl Goldberg, Dave Boddington, iGull, Kamco, Hobby Shack, Sailplanes International, RCM&E

Back ground to Sky High RC can be viewed on our website