'Falcon 56 mk1' Laser-cut Rib & Fuselage Set

Note: This is not a complete kit. A plan is not included, and additional materials are required to complete the model.

This is the renowned Falcon 56 Mk 1 rudder/elevator version (photo shows Mk2 aileron version) that can easily be retrofitted with ailerons if desired.

This is the current rib pack plus extra fuselage parts in balsa and lite ply to give a partial kit only requiring strip wood and some sheeting and hardware. The fuselage sides are ‘jigsaw jointed’ giving an exceptionally strong connection (supposedly stronger than the original balsa).

Model Specification:

• Brand:                          Carl Goldberg
• Type:                            RC sports model for 3-channel 
• Wing span:                   56"
• Wing Area:                   558 sq in 
• Length:                         43"
• Weight:                         3.5 lbs
• Engine:                        .15cc - .19cc i/c or electric

The box contains a set of the following 75 laser-cut parts

• 30 Wing ribs cut from hand-selected 1.5mm & 3.0mm balsa
• 14 Tail ribs cut from hand-selected 1.5mm balsa
• 9 dihedral and stab braces in 3mm balsa and 3.0 lite ply.
• 15 assorted fuselage parts cut in 1.5, & 3.0mm balsa
• 2 braces cut in 3.0 lite ply
• 5 fuselage formers cut in 3.0mm hand-selected balsa
• The Set also has 'platform' rib tabs (removable) that allow wing alignment during the build.
• Ribs have 'vent' holes cut to reduce the 'ballooning' effect with film covering.
• No plan is included. This is not a complete kit.

The plan for this model can be purchased via this direct link: https://www.ebay.co.uk/itm/156089544691

Check out our eBay shop to view all model categories at: www.ebay.co.uk/str/skyhighrc  

Please read the rest of the description below carefully as this is not a complete kit.

• The box contains laser-cut ribs/parts only.
• This is not a complete model kit.
• Additional materials will be required to complete the model.
• All photos are for illustration purposes only.
• The photo of laser-cut parts (blue background) shows exactly what you will receive in the box
• for clarity, the picture shows ribs for one wing/stab only
• Building plans are not included
• Plans can be obtained from https://model-plans.co.uk/

We have over 200 quality model rib sets/parts available, please have a browse through all our eBay listings / latest news on Face Book @ Sky High RC

Quality laser cut rib sets also available for ...

Veron, Aeromodeller, APS, Graupner, Frog, Mercury, Radio-Modeler, Chris Foss, Carl Goldberg, Vic Smeed, KK, RC Powers, Airtronic’s, Flair, Carl Goldberg, Dave Boddington, iGull, Kamco, Hobby Shack, Sailplanes International, RCM&E

Back ground to Sky High RC can be viewed on our website