Descriptions:
Type: Zinc alloy bearing seat
Seat material: zinc alloy
Bearing Material: Bearing Steel
Model:KFL08,KFL000,KFL001,KFL002,KFL003
KFL004、KFL005、KFL006
Size:8mm,10mm,12mm,15mm,17mm,20mm,25mm,30mm
1... There are two fixing screw holes on the top of the bearing core, which can be fixed by locking the screws, so it is easy to use. However, there is no spanner or screws for fixing the bearing housing.
2... Bearing in the seat of the fine adjustment function, applicability, wide range of applications. Common sense, that is, the bearing can swing inside the seat.
3. These bearings are deep groove ball structure, there is a certain gap between the inner ring and the outer ring, and is not suitable for high-precision spindle.
4. The bearing is tilted into the bottom of the bearing seat, and then assembled by the board, there may be a small amount of unevenness (the core and seat are a little tilted, not in a plane).
You can fix the seat, with a longer shaft (leverage principle) in the inner hole wrench, you can be back to the right. (Page below the schematic) so the bearing in the seat tilt or uneven phenomenon, is a normal phenomenon, not a quality problem. This phenomenon mind please be careful to shoot!
5. such bearing seat is applicable to mechanical speed, for high speed customers, please be careful to shoot!
Seat material: zinc alloy
Bearing Material: Bearing Steel
Model:KFL08,KFL000,KFL001,KFL002,KFL003
KFL004、KFL005、KFL006
Size:8mm,10mm,12mm,15mm,17mm,20mm,25mm,30mm
1... There are two fixing screw holes on the top of the bearing core, which can be fixed by locking the screws, so it is easy to use. However, there is no spanner or screws for fixing the bearing housing.
2... Bearing in the seat of the fine adjustment function, applicability, wide range of applications. Common sense, that is, the bearing can swing inside the seat.
3. These bearings are deep groove ball structure, there is a certain gap between the inner ring and the outer ring, and is not suitable for high-precision spindle.
4. The bearing is tilted into the bottom of the bearing seat, and then assembled by the board, there may be a small amount of unevenness (the core and seat are a little tilted, not in a plane).
You can fix the seat, with a longer shaft (leverage principle) in the inner hole wrench, you can be back to the right. (Page below the schematic) so the bearing in the seat tilt or uneven phenomenon, is a normal phenomenon, not a quality problem. This phenomenon mind please be careful to shoot!
5. such bearing seat is applicable to mechanical speed, for high speed customers, please be careful to shoot!
Package include: According to your choice.
Payment:
PayPal, PayPal Credit, MasterCard, Apple Pay, Google Pay...are all supported.
Shipping:
Please make sure your address 100% right.
Return Policy:
If you are not satisfied with the item,any problem,please contact with us before you give a negative feedback,because it doesn't help you at all.we will try our best to help you solve the problems.
Feedback:
Your satisfaction is very important for us.If you are satisfied with our item or service,please give us a positive feedback and 5-Star DSRs rating.
Contact Us:
We are very glad to help you,please feel free to contact us whatever any problems.Due to high volume of daily incoming emails and time zone difference,please allow 24 hours for us to reply.
About Item:
For the funcitonal products in our shop,we make sure that the functions are the same as description,but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.Please be advised before you bid.
