XY Axis Sliding Table Sliding Stage Cross Roller Type Motorized Platform

Features:
- XY axis cross roller type sliding table
- Precise positioning
- Corrosion resistance
- High precision

FEY6020 Specifications:
- Table top size: 60x60mm/2.4x2.4"
- Load: 7.5kgf
- Motor: Two-phase stepper motor
- Travel: ±10mm/±0.4"
- Accuracy: ±0.001mm/±0.00004"
- Transmission: ball screw

FEY8030 Specifications:
- Table top size: 80x80mm/3.1x3.1"
- Load: 9.0kgf
- Motor: Two-phase stepper motor
- Travel: ±15mm/±0.6"
- Accuracy: ±0.001mm/±0.00004"
- Transmission: ball screw

FEY10040 Specifications:
- Table top size: 100x100mm/3.9x3.9"
- Load: 13kgf
- Motor: Two-phase stepper motor
- Travel: ±20mm/±0.8"
- Accuracy: ±0.001mm/±0.00004"
- Transmission: ball screw

FEY12070 Specifications:
- Table top size: 120x120mm/4.7x4.7"
- Load: 16kgf
- Motor: Two-phase stepper motor
- Travel: ±35mm/±1.4"
- Accuracy: ±0.001mm/±0.00004"
- Transmission: ball screw

Package Included:
- 1 x Sliding Table

Note:
- Other cables and drivers are not included. Please purchase separately.
- Sensor: limit + origin, with NPN open circuit output.
- It is designed with a 35cm/13.8" cable and a D-SUB 15-pin male connector, a 28 stepper motor, and a photoelectric switch.
- The basic parameters are designed and produced according to the standard travel.

Troubleshooting Methods:
- If the motor or mechanism is hit by an external force, please check whether the smoothness of the screw will affect the work of the sliding table.
- Do not arbitrarily adjust the left and right limit position and origin position to avoid collision and affect its use.
- Please pay attention to the firmness of the cable and socket of the limit switch, to prevent loosening.
- Do not loosen the coupling and transmission structure at will, so as not to affect the accuracy and its use.
- If there is any abnormal noise or abnormal vibration during operation, please power off and then check.