Description:

Are you troubled by stubborn horny dead skin,rough skin problems,feel not confident when wearing foot-shoes,When wearing stock,do you worry that rough skin will make it hook?

Electric Foot Callus Remover can help you remover stubborn dead skin and rough horny skin.Through the simple care,make your feet skin restore delicate and smooth.

Whether you are a stubborn skin for the elderly,long-term exercise,running,climbing rough skin,or wearing high heels for worn skin,it is very suitable perfect for foot health care.

 

Features:

-【Powerful,Safe & 4 Speeds Adjustable】This Electric Foot Callus Remover have 4 speeds:2000x/min when at low speed and 2300x/min when at high speed.If the pressure is too strong,it will automatically stop working and avoid damage to the healthy skin.

-【Rechargeable Long Lasting】High quality 500mah large capacity lithium battery has overcharge protection.The USB charging time for 3 hours,it can powerfully run continuously for about 100 minutes.

 

Product Specifications:

Item Type:Electric Foot Grinder

Material:ABS

Color:White

Battery Capacity:500mAh

Operating Voltage:DC 3.7V

Operating Current:≤200mA

Standard Working Environment Temperature:5~50℃

Noise:≤72dB

Charging Time:2.5h

Using Time:100 mins

Charging Method:USB Recharge

Item Weight:200g / 0.44 lb

 

Operation Instructions:

1.Keep the skin surface of the feet dry before use,if there is water on the skin surface,you need to dry it with a towel before operation.

2.Long press 1.5 seconds on / off,according to their own foot skin in advance to adjust the gear (a total of 4 adjustable gear).

3.Scrub head lightly against the skin,adhesion should not be too large,slowly slide over the skin surface to be polished,use in the calluses and thick horny feet.When using the calluses and thick horny feet to play 1-2S is appropriate,the same position grinding time should not exceed 3-4 seconds to avoid local skin damage.

4.After the completion of sanding to check whether the skin surface to achieve the desired effect,the opposite can be repeated in the same location sanding,and so on,until satisfied.

until you are satisfied.

5.Press and hold 1.5 seconds to turn off the machine after the above steps,press the abrasive head removal switch to take out the abrasive head and wash it,wipe the skin attached to the abrasive wheel surface with a dry/wet towel.

The skin on the surface of the wheel with a dry/wet towel.Use a dry/wet towel to wipe the skin crumbs attached to the surface of the wheel and place it in a dry and ventilated place.

6.After use,you can properly apply some foot cream to moisturize the feet,the effect is better.

 

Packing List:

1 * Electric Foot Grinder

1 * USB Cable