Item Specifics
Brand KAC
Type Catalytic Converter
Labels & Certifications EPA
Features Clamp-on Connection
Manufacturer Part Number Y01O09014
Items Included Seal
Manufacturer Warranty 5 Years
Body Material Stainless Steel
Substrate Material Ceramic
Universal Fitment No
Finish Stainless Steel
Interchange Part Number 15844,40243,0991611,324208
Other Part Number 83090,53090,0961611,642939
Connection Type Flare / Pipe Connection
Fitment Type Direct Replacement
Restricted States California, New York, Colorado & Maine
UPC 958402750101

EPA Catalytic Converter for 1998 - 2002 Toyota Corolla / Chevy Prizm 1.8L OBDII

Product Description;

 

The basic job of a catalytic converter is to eliminate unburned fuel and potentially dangerous compounds from the exhaust beFore they can reach the environment.

 

If these toxic gases are not removed, then it can have dangerous effects on the environment. This device is specially designed to reduce the emissions of the vehicle and greenhouse gases.

 

However, if the converter is not working properly, and some issue arises, then the effect is very clear that even the driver sitting inside can easily notice it.

 

All in all, the high quality catalytic converter with high quality materials and precision tools. What's more, the product is covered with 5-year limited warranty.

 

NOTE: BeFore placing the order, please check year and model according your vehicle. So you will get a catalytic converter perfect fitting For your car. And professional installation is suggested.

 

Feature;

 

Manufactured From High Quality & Durable Stainless Steel Catalytic Case For Long Lasting Durability & For Better Protection.

 

This product is mainly used to convert toxic gases and pollutant into harmless gases and purify and treat automobile exhaust.

 

Good emission control, high work efficiency and easy to use.

 

Made according to the original specifications, it can directly replace old or broken parts.

 

• EPA Approved.

 

EPA approved For all Federal and CaliFornia compliant vehicles, including Low Emission Vehicles* in all states excluding CaliFornia. 

 

Not legal For sale in CaliFornia. If your vehicle is registered in CaliFornia, do not purchase this part. If your vehicle meets CaliFornia requirements,

 

but is not registered in CaliFornia, this converter will work on your vehicle.

 

• No engine light problems,Can pass EPA inspection

 

• 5 years or 50,000 miles limited warranty

 

Specifications;

 

Other Part Number:

 

15844

 

Package Content;

 

Front

 

Compatible with the following vehicles;

 

For Chevrolet Prizm 1.8L V4 1998-2002


For Toyota Corolla 1.8L V4 1998-2002


Payment
Instant PayPal payment is the preferred method of payment.
We will only ship to the confirmed PayPal shipping address given with the payment.
If you want to ship to other address, please change your PayPal shipping address before you make payment.
To avoid initiating an unpaid item claim, please pay within 7 days.
Shipping
We will ship item locally for US buyers. Usually for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
For US customers, all items will be shipped out within 1-3 business days with cleared payment. Please included your phone number to the payment note for prompt and secure shipment.
Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.
Shipment
Returns
◆ 30 Days easy returns satisfaction guarantee.
◆ Items to be returned must be in original factory condition.
◆ Please enclose a note about item number and order id, your eBay ID and the reason of return.
Return
Contact Us
If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem!
We always put our customers first and your satisfaction is guaranteed.
Our  Tech's are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.
Feedback
1.We appreciate your business and strived to improve our customer service and our commitment to quality.
2.We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do.
3.If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, and we will be glad to work with you to have it resolved.


Brand New Starter For 05-08 Dodge Ram 1500 2500 3500 4000 5.7L 17933

Specification:

  • Unit Type: Starter
  • Part Type: UNIT
  • Voltage: 12
  • Rotation: CW
  • Teeth: 10
  • KW: 1.7
  • Starter Type: PMGR
  • Brief: For dodge RAM TRUCKS 5.7L w/AT 2005-08
  • ARROWHEAD: SMT0245
  • For chrysler: 04801253AA, 4801253AA
  • J & N: 410-48131
  • LESTER: 17933
  • For mitsubishi: M0T21371, M0T21371ZC
  • WAI: 2-2697-MI

 


Feature:

  • ARROWHEAD: SMT0245
  • For chrysler: 04801253AA, 4801253AA
  • J & N: 410-48131
  • LESTER: 17933
  • For mitsubishi: M0T21371, M0T21371ZC
  • WAI: 2-2697-MI


Application:

 

MAKE TYPE MODEL YEAR ENGINE
For dodge Auto and Light Truck RAM PICKUPS 2005 5.7L(345) V8
For dodge Auto and Light Truck RAM PICKUPS 2006 5.7L(345) V8
For dodge Auto and Light Truck RAM PICKUPS 2007 5.7L(345) V8
For dodge Auto and Light Truck RAM PICKUPS 2008 5.7L(345) V8

 

Package Includes:


1 x Starter

 

 

 

Fault check:


The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:

1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.

2. The starter thread is loose or off, and the switch or adsorption switch fails.

3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.

4. Excitation coil or armature coil is short-circuited or disconnected.

5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance

In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed

5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.

 

 

 

How to Install a Car Starter:

 

There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.

 

Part 1: Removing a Bad Starter

(1).Disconnect the battery. 
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.

 

(2).Jack up the vehicle if need be. 
Ensure you jack the vehicle up on firm, level ground.

 

(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.

 

(4).Disconnect the wiring to the solenoid. 
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.

 

(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.

 

(6).Compare the new starter to the old one.  Slide the starter into place. 
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.

 

Part 2: Installing a New Starter

(7).Insert the starter retainer bolts. 
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.

 

(8).Connect the wiring to the starter solenoid. 
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.

 

(9).Reconnect the battery. 
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.

 

(10).Listen to the vehicle as you attempt to start it. 
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.

 

(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery. 
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.

If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.

 

(12).Check to see the starter solenoid is bad. 
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.

 

 

Frequently Asked Questions:

 

(1).Why is my car starter burning out?
You likely cranked the starter for too long.

 

(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,

replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.

 

(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.

If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?

How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.

Follow it and find the origin of the wire, it could be a simple fix just take a look at it.

 

(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.

One really common sign is if you see any smoke coming from the starter.

 

(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.


Instant PayPal payment is the preferred method of payment.
We will only ship to the confirmed PayPal shipping address given with the payment.
If you want to ship to other address, please change your PayPal shipping address before you make payment.
To avoid initiating an unpaid item claim, please pay within 7 days.
We will ship item locally for US buyers. Usually for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
For US customers, all items will be shipped out within 1-3 business days with cleared payment. Please included your phone number to the payment note for prompt and secure shipment.
Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.
Shipment

how to process return ?

1:contact seller first
2: send images : outer package & scan label & item itself & with complete accessories etc
necessary condition  
rule A: item with original package in unused condition .
rule B: outer package without any damage.

3: get the return label for return 

4: item delivered -payment repay 
(Returns or exchanges will be subject to a 15% restocking fee of the original item purchased plus cost of 
return shipping and replacement shipping. 
Exchanges due to shipping errors by will not be subject to a restocking fee or shipping charges)

Priority:
in the condition o the below reasons.the shipping cost will be undertake by buyers 
1: order accidently
2: find better price 
3: change  mind 

kindly note:
accessory missing/ quality issue/ shipping damage.etc 
please contact us for good solution first instead of opening return dispute.

If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem!
We always put our customers first and your satisfaction is guaranteed.
Our  Tech's are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.
1.We appreciate your business and strived to improve our customer service and our commitment to quality.
2.We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do.
3.If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, and we will be glad to work with you to have it resolved.


Brand


On May 14, 2024 at 17:52:24 PDT, seller added the following information:

DataCaciques