W3231 Digital Dual LED Thermostat Temperature Controller + NTC Sensor 110-220V

Popular

    Product Introduction

    Temperature controller instruction manual
    Temperature control range: -55°C~120°C/-67°F~ 248°F
    Temperature control accuracy: 0.1 °C / 0.1 °F
    Display color: red + blue
    Working power supply: AC110V~220V
    Sensor: NTC 10K 1 Meter (with probe)
    Product Size: 79.2mm×41.9mm×26.3mm
    Hole Size: 72.1mm×39.2mm
    product weight:59g（110V~220V）
    Operation and display panel
     
    Operation guide1. Short press “SET” small digital tube to flash, press “△” or “▽” to set the target temperature, press “Standby” button or no operation to save the setting within 3 seconds.2. Press and hold “SET” to enter the code setting mode, press “△” or “▽” to switch the code. After selecting, press “SET” to enter the code setting. After setting, press “Standby” button or no operation to save the setting within 3 seconds. .3. The last parameter setting is saved by default after shutdown.4, restore the factory settings: press and hold "SET" to power on.5. When the module is powered on, it will start directly. After power-on, press and hold the “standby” button, the module will enter “sleep” or “wake up”; in case of power failure, the module will run automatically after power recovery, no need to start manually.
     
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    W3231 Digital Dual LED Thermostat Temperature Controller + NTC Sensor 110-220V

    Product Introduction

    Temperature controller instruction manual
    Temperature control range: -55°C~120°C/-67°F~ 248°F
    Temperature control accuracy: 0.1 °C / 0.1 °F
    Display color: red + blue
    Working power supply: AC110V~220V
    Sensor: NTC 10K 1 Meter (with probe)
    Product Size: 79.2mm×41.9mm×26.3mm
    Hole Size: 72.1mm×39.2mm
    product weight:59g（110V~220V）
    Operation and display panel
     
    Operation guide1. Short press “SET” small digital tube to flash, press “△” or “▽” to set the target temperature, press “Standby” button or no operation to save the setting within 3 seconds.2. Press and hold “SET” to enter the code setting mode, press “△” or “▽” to switch the code. After selecting, press “SET” to enter the code setting. After setting, press “Standby” button or no operation to save the setting within 3 seconds. .3. The last parameter setting is saved by default after shutdown.4, restore the factory settings: press and hold "SET" to power on.5. When the module is powered on, it will start directly. After power-on, press and hold the “standby” button, the module will enter “sleep” or “wake up”; in case of power failure, the module will run automatically after power recovery, no need to start manually.
     
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques