Condition: 90% New & 100% Working & 100% Tested. Only Board and I/O Shield are included. Don't Include the CMOS battery and Other Parts. --------------------------------- This motherboard model is GIGABYTE GA-970A-DS3 The quality is original second-hand goods.(Used product 90%-80% new) But it is working well, we will finish 100% testing before shipping. Packing include one motherboard and one metal baffle without a CMOS battery, did not have another part. Please make sure you buy the right board to ensure 100% compatibility with your other hardware. --------------------------------- CPU AM3+ Socket: AMD AM3+ FX processors AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor (Please refer "CPU Support List" for more information.) Hyper Transport Bus HyperTransport™ 3.0 Support up to 5200MT/s Chipset North Bridge: AMD 970 South Bridge: AMD SB950
Memory： 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory (Note 1) Dual channel memory architecture Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules (Note 2)
Audio Realtek ALC887 audio codec High Definition Audio 2/4/5.1/7.1-channel Support for S/PDIF Out
LAN Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 3) 1 x PCI Express x16 slot, running at x4 (PCIEX4) 3 x PCI Express x1 slots (All PCI Express slots conform to the PCI Express 2.0 standard.) 2 x PCI slots
Storage Interface South Bridge: 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
USB South Bridge: Up to 12 USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available through the internal USB headers) Etron EJ168 chip: Up to 2 USB 3.0/2.0 ports on the back panel (Note 4)
Internal I/O Connectors 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 6 x SATA 6Gb/s connectors 1 x CPU fan header 2 x system fan headers 1 x power fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 3 x USB 2.0/1.1 headers 1 x Clear CMOS jumper
Back Panel Connectors 1 x PS/2 keyboard/mouse port 6 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports 1 x RJ-45 port 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller iTE I/O Controller Chip
H/W Monitoring System voltage detection CPU/System temperature detection CPU/System/Power fan speed detection CPU overheating warning CPU/System/Power fan fail warning CPU/System fan speed control (Note 5)
BIOS 2 x 32 Mbit flash Use of licensed AMI EFI BIOS Support for DualBIOS™ PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features Support for @BIOS Support for Q-Flash Support for Xpress Install Support for EasyTune (Note 6) Support for Smart Recovery 2 Support for Auto Green Support for ON/OFF Charge Support for 3TB+ Unlock Support for Q-Share Bundled Software Norton Internet Security (OEM version)
Operating System Support for Microsoft® Windows 8/7/Vista/XP Form Factor ATX Form Factor; 30.5cm x 22.5cm
Note (Note 1) Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
(Note 2) To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU first.
(Note 3) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
(Note 4) Be sure to connect your USB device(s) to the USB 2.0/1.1 ports before the USB 3.0 driver is installed.
(Note 5) Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
(Note 6) Available functions in EasyTune may differ by motherboard model.
Remark Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website. --------------------------------- What to do after getting on the board: 1. set up CPU & RAM. Power on to test if the screen works well. 2. Installed fan, battery, keyboard, sound card, and network card to turn on to check if the bios number is correct. 3. Music playing to check audio and earphone plug ok. 4. See if the battery can normally charge and discharge. 5. Then the touchpad, USB slots, and all lights. 6. Run 3D mark 7. Restart the Windows. We have always been doing our best to provide the best service and reliable products for every customer. Please contact us to resolve the issue before leaving negative feedback If you have any questions, please feel free to contact me. You will get great service and fast shipping when you buy our product.