Applications:

Low temperature thermostat is widely used in petroleum, chemical, electronic instrumentation, physics, chemistry, biological engineering, medicine and health, life science, light industry and food physical testing and chemical analysis and other research closed doors, colleges and universities, enterprise quality control and production departments, to provide a hot and cold controlled, uniform and constant temperature for users to work constant temperature experiments on experimental samples or products produced or test, can also be used as a direct heating or cooling and auxiliary heating or cooling It can also be used as a heat or cold source for direct heating or cooling and auxiliary heating or cooling.

Features:

1. 1. High-Quality Material: Lab chiller cooler made of SUS304 stainless steel, electrostatic spraying, rust, and corrosion resistance. Provide users with a high-quality Low-Temperature Circulator.
   2. Compressor & Circulating Pump: High efficiency fully enclosed compressor, compact structure, fast cooling speed, strong temperature stability. Silent circulating water pump, low noise, stable operation, and stable water flow.
   3. Intelligent Control: The High-end large LCD control instrument is easy to operate, can correct the deviation of the temperature measurement value, high-temperature control accuracy, and good stability. And the accurate temperature correction function can reach 0.01 ℃.
   4. Protection System: The refrigeration has overheating and overcurrent protection. The control system has over-temperature tweet alarms, which can set the upper and lower limits of the temperature. Temperature range: -5/-10/-20℃ - 100℃. The over-temperature alarm temperature can automatically cut off the load when over-temperature.
   5. Wide Application: Recirculating water cooling Chiller is particularly suitable for chemical, biological, and physical laboratory work under normal conditions or where low temperatures are required.

Operation steps

1. After the liquid is added to the sink, the distance between the liquid level and the working table surface should not be less than 20mm.

2. When using oil as working fluid, the initial temperature of the oil must be higher than the temperature range selected for the work, at least 15 or more.

3. When circulating pump is connected with external equipment, such as jacket, high temperature distillation or other equipment. Ensure that the outlet pipe of the high temperature oil bath is connected to the inlet pipe of the external equipment.

4. Turn on the power, then turn on the power switch and the CIRCULATOR button.

5.Setting Tempreture,waiting it heats to the tempreture you needed.

6.After use, pour out the reaction liquid and disconnect the switch.

Notes:

1. This high temperature circulator should be placed at dry and ventilated places, preventing heat and damps. There should be no objects around its back and sides in 300mm.

2. If you do not use it temporary, please turn off all buttons and the power.