Cut-End to Cut-End Extension Connector

Philips Hue is great, but it only allows for a single, continuous lightstrip run. Litcessory products allow for several! This cut-end to cut-end extension connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect one cut light directly to another cut lightstrip. No more wasting costly lightstrip pieces! You can also use this connector to create corners for your lightstrip run, allowing for more design flexibility than ever before! Our cables are flexible and flat, which makes them inconspicuous - perfect for designing your ideal lighting setup!

This product is great for...

• Reusing the end of a cut lightstrip

Important things to keep in mind...

• Supports lightstrip runs up to 33 feet/10 meters (lightstrips and extension cables combined)
• Cable is UL Listed
• Made for indoor dry locations only

Correct use of the Cut-End to Cut-End Extension Connector

Frequently Asked Questions:

Will Litcessory products cause my lightstrip to be dimmer?

• No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!

What is reverse polarity, and how do I fix it?

• Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed.

I used a cut-end connector and now my lightstrip colors don’t match. How do I fix this?

If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the connection points on the lightstrips. Try the following:

1. Unplug the power source
2. Ensure the backside of the connection points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that it is fully inserted.
3. Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
4. To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.

If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!

Can you insert 6-pin connectors into the cut-end connector?

• No, you cannot insert a 6-pin connector into the cut-end connector. If you need to connect a lightstrip with a cut-end to a 6-pin connector, you will need our Cut-End to 6-Pin cable. Remember: Cut lightstrips connect to only cut-end connectors and 6-pin ends can only connect to 6-pin connectors. Cut lightstrips cannot connect to a 6-pin connector.

Can I plug an extension cable into a Cut-End to Cut-End Connector?

• No, to connect an extension cable to a cut lightstrip, you will need to use our 6-Pin to Cut-End Connector. Remember our rule of thumb: Cut lightstrips connect only to cut-end connectors. 6-pin connectors only connect to other 6-pin connectors. Cut-end connectors cannot connect to 6-pin connectors.