2) Features: Unique design cups the return spring to stop it from sliding off and possible injury, fast, safe, and easy way to remove and replace return springs.

3) Material: Tool is carefully forged from the finest alloy steels for a long service life. Easy to use and reduce your maintenance costs, extra-long handle provides exceptional stability.

4) How to use: Slide the Spring Tech Tool between the laces over the top roller and hook the top of the return spring under the coil. Press the handle down, and depending on which direction the spring opens, pull back or push the handle forward to unhook the spring from the pin.

 

lnstallation:

–Install both the roller and the roller retainers in both shoes.

– Install the return spring pins if required.

– Install the top shoe - insure that the cam is rotated to seat the roller in the lowest position.

– Hang the anchor springs from the top shoe.

– Attach the lower shoe, with the anchor springs, and then rotate the lower shoe into position.

– Install the retum spring on the lower shoe with the upper spring opening facing the roller.

– Slide the Brake Return Spring Tool between the shoe webs over the top roller and hook the top of the return spring below the upper coil.

– Push down on the handle and hook the spring over the pin by pulling back on the handle.

Removal:

-- Rotate the S cam - insure that the cam is rotated to seat the rollers are in the lowest position.

-- Slide the Brake Return Spring Tool between the shoe webs over the top roller and hook the top of the return spring below the coil.

-- Push down on the handle and unhook the spring from the pin by pulling back or pushing forward on the handle depending on the direction of the spring opening.