Magnetic Card Swipe Reader Feature:

* Track 1/2/3 Magnetic Card Reader Smart Card Reader

* Plug and play, free drive, uploading data actively;

* Working state sound and light dual indicator;

* Supporting swiping card Bi-directionally with high and low speed;

* Using imported chip, read weak magnetic stripe card, high sensitivity, low power consumption.

* Strong compatibility, strong anti-interference;

* Identify the different density and standard card automatically ;

* Hardware decoding, the output data is decoding data, customers do not need to write the decoding process, greatly simplifying the difficulty of programming.

* USB interface, analog USB keyboard mode (customizable keyboard interface, RS232 serial port, TTL interface, PS2 etc.)

Interface Introduction(USB Keyboard Type)

1. the Swiping card slot is the simulation of USB keyboard, using USB keyboard drivercomes with system, so long as where you can use the keyboard to input characters into, you can get card data with a card slot, such as Notepad, word, etc.

2. when using the card slot,please switch the input methodto the English mode and make sure your keyboard "Lock Cap" key is not locked.

3. acquiescence is three tracks. Upload one two three track data in turn. The first track data with"%" beginning,with "?" end, the Second track data with";"beginning,with "?"end, the third track data with"+" beginning, with "?" end.the whole data with "Enter" over.

USB Port 13.56MHz Mifare/RFID Card Reader 

Features:

1.Diagnostic Power LED,waterproof,great small compact design

2.Built in operating buzzer,Easy usage,plug and play

3.This is a card reader, card reader support. It does not support write.

4.Directly into the computer can use. You do not need to download the program.

5.USB card issuer implements the serial number of the card directly to a computer via the USB port, users do not load when using any driver, no external power supply, the card issuer is connected to the computer USB port, card indicator alternates red and green, until you hear even after the buzzer beeps twice, only the red light indicator shows, you can start card, credit card after the card number is displayed at the cursor location.

6.Support systems: operating system Windows 98 XP32 XP64 2000 Vista 32 Vista 64, Android

7.Operating frequency: 13.56MHz or 125KHz

8.Support Card：M1, S50 and S70 143A protocol card

9.Reading distance:  0-80MM

10.Working current: 100mA Indicator Lamp LED Indicator Lamp

11.Physical Dimensions: 105mm*70mm*12mm

12.Card format:

Optional 8H10D (before 10), 6H10D, 6H8D, 2H3D + 4H5D (after 8), 10H, 8H, 6H, 4H5D+4H5D,

Card reading time： < 100MS

Card reading speed： 0.2S

card reading distance： 0.5S

Communication Interface ：USB Interface 

Power-on mode ：USB power-on 

Working environment ：temperature (-20 ~85 C) humidity (5%~95%) working voltage 5V

Built-in horn buzzer, controllable LED and buzzer

output format ：10-bit 10-bit (other format consulting customer service)