K2 RADIATOR STOP LEAK is the highest quality product for sealing radiators. It seals even large leaks quickly and effectively.
It is perfect for removing leaks caused by stone chipping, vibrations or other mechanical damage. It can be used in all types of coolers. It is miscible with any type of coolant, including the newest long life types. It does not obstruct the circulation of the fluid inside the system.
Safe for the heater and other elements of the cooling system.
HOW TO USE:
1. With the engine cold and off (no risk of scalding), unscrew the expansion tank cap or the radiator cap (if there is no expansion tank).
2. Shake the packaging.
3. Pour the contents into the radiator (for systems whose capacity does not exceed 20 liters, use the entire package).
4. Replace the cap, start the engine and let it run until it reaches operating temperature.
5. Increase the speed from time to time to distribute the product evenly. If the leak still persists, it will require a mechanical repair in a workshop. Leaving the preparation in the cooler protects it against further leaks in the future.
CAPACITY: 400 ml
metal layer that fills leaks permanently. Contains inhibitors counteracting rust and corrosion. Does not clog the cooling system. Avoids depositing of scale. Acts fast and effectively.
Directions:
Check strength of radiator coolant/anti-freeze and top up or refill if necessary.
Start engine and run it for a few minutes to warm up coolant/anti-freeze.
Note
When opening a hot cooling system avoid any possibility of scalding from hot fluids. If the cooling system is dirty or restricted first use K2 Radiator Flush to remove deposits and rust.
Pour the Stop Leak into the radiator or expansion tank.
Close the radiator cup and run the engine. Leaks should disapper within 15minutes.
Leaving The product in the cooling system protects from new leaks. If the leak persists the radiator and cooling system should be checked by a specialist workshop.
