-Features to tilts between 0- 90 Degrees & can be locked at any position.
-Table diameter 100 mm
-Table is graduated 360 Degrees.
-Worm Gear Ratio -1:36, which means that the 1 handle rotation turns the table by 10 Degrees.
-Centre Height in vertical position: 2-5/8" (66 mm approx)
-Hand wheel is graduated in divisions of 10 min & can be set to zero.
Rotary Table Horizontal and Vertical 4 Inch 3 slots
Precision Mini Rotary Table 4 Inch or 100mm is manufactured from Seasoned casting
Vertical center Height : 2-1/16"
Hand Wheel can be set to Zero
Hand Wheel Graduated in 10 Min Divisions
In 3 Slots so you can put you Chuck on its easily.
3 T Slots for fixing work to easily clamp chucks.
Can be used both Vertically & Horizontally.
4" ROTARY TABLE WITH MT-2 Bore 3 Slot
High Precision and Smooth Rotation of Hand wheel.
Table Diameter Is 105 mm,
Height 50 mm
Vertical center height 75 mm
Re settable dial
one turn = 5 degrees table graduated 360 degrees
Center Has a MT-2 Taper.
Quick Release System for Manual Indexing.
And Has 3 Tee Slots.
50mm Lathe Chuck Self - Centering 3 jaw :
-Quality 3 jaw self centering chuck 50mm Diameter with 14x1mm Thread
-Contra rotating rapid jaw adjustment mechanism.
50mm Lathe Chuck Independent 4 jaw :
-2" / 50mm LATHE CHUCK
-4 Jaw Independent Centering Chuck
-Contra rotating rapid jaw adjustment mechanism.
-1 Handle with 50mm chuck
65mm Lathe Chuck Self - Centering 3 jaw :
-Quality 3 jaw self centering chuck 65mm Diameter with 14x1mm Thread
-Contra rotating rapid jaw adjustment mechanism.
65mm Lathe Chuck Independent 4 jaw :
-65mm LATHE CHUCK-4 Jaw Independent Centering Chuck-Contra rotating rapid jaw adjustment mechanism.-1 Handle with 65mm chuck
70mm Lathe Chuck Independent 4 jaw :
-70mm LATHE CHUCK
-4 Jaw Independent Centering Chuck
-Contra rotating rapid jaw adjustment mechanism.
-1 Handle with 70mm chuck
-Diameter of Base : 80 mm
-Jaw Width : 54 mm
-Jaw Depth: 20 mm
-Jaw Opening : 32 mm
-Height : 29 mm
-Made of high grade close grain caste Iron.
-The moving jaw has V-grooves to hold Round objects.
-Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table.
-The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement.
-Caste Iron 100 mm Round Vice for Rotary Table
-Fixing T-Nuts
-Diameter of Base : 105mm * Jaw Width : 80mm * Jaw Depth: 21mm * Jaw Opening : 40mm * Height : 32mm
Description:
A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis.
Rotary tables are most commonly mounted "flat", with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates about a horizontal axis.
Application:
Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Simple to operate, they allow easy work handling and have many varied applications includes
Rotary table uses:
To machine spanner flats on a bolt
To drill equidistant holes on a circular flange.
To cut a round piece with a protruding tang
To mill helices
To cut complex curves (with proper setup)
To cut straight lines at any angle