Kit rating: MODERATE DIFFICULTY
The Rakit Baby8 step analogue sequencer version 3 includes all the great features of previous versions plus some awesome additions!
*Sequence length between 1 and 8 steps
*0-5V CV outputs
*20% to 80% gate duty output
*Buffered clock input
*Each step has it’s own CV potentiometer, led & switch
*Battery powered (battery is not included)
*Connects to the Rakit mini APC and Drum Synth
*NEW Step Skipping Mode
To find out more please read the full description below…
Are you looking for something a bit more challenging? Take the next step on from our beginner’s soldering kits with the Rakit Baby8! The uses for this controller are only limited by your imagination!
Kit Assembly
This kit is rated as easy, takes around 2hrs to make and is suitable for all ages. The only equipment needed to complete this kit is a soldering iron and a pair of flush cutters. 1m of our favourite lead free solder is included in the kit.
How It Works
The Baby8 is not an instrument in itself, but a controller of a vast array of other noise making devices with a 0-5V CV input. Examples include our Mini Atari Punk Console, synthesizers, our Drum Synth, effects pedals – the list is endless!
Build Support
We are unable to provide individual customer support with kit building so please see the detailed assembly guide at Rakit to gauge difficulty before purchasing. Once started, kits cannot be refunded.
Step Reset Mode
Set the length of your sequence from 1-8 steps in this mode. Simply set the switch after your chosen number of steps to reset and away you go!
Step Skipping Mode
When selected, this mode enables you to set any of the switches (2-8) to ‘skip’ and then continues with the rest of the sequence creating all manner of funky rhythms!
CONNECT TO OUR ATARI PUNK CONSOLE
A set of connectors is included with kit to bring the Baby8 and mini APC together for all sorts of fun! The set consists of two strips of pin headers and 5 multi-coloured jumper cables for connecting power sharing, 2x CVs, Gate and Ground.
GET CONNECTED
Connect to the Rakit Drum Synth using standard 3.5mm mono jack cables.
CV Out ⇨ Pitch
Gate ⇨ Trigger
Rakit have a handy soldering tutorial and easy to follow assembly guides which can be followed online on our website. They contain plenty of photos, hints and tips to help you along the way!
PCB
4x Stand-offs and nuts
9x 10k Potentiometers
1x 500k Potentiometer
2x 10u Electrolytic Capacitor
1x 4u7 Electrolytic Capacitor
3x 100n Ceramic Capacitor
9x LEDs
1m Lead Free Solder
1x Right Angle Switch
8x SPDT Slide Switch
3x Mono Jack
4x 1k0 Resistors
2x 4k7 Resistors
4x 10k Resistors
2x 22k Resistors
2x 33k Resistors
1x 47k Resistor
3x 100k Resistors
8x 200k Resistors
9x 1N1448 Diodes
1x CD4017
1x CD4093
1x LM324N
1x 78L05 5V Regulator
Battery Snap
1 x APC to Baby8 Connector Set
Shipping within the UK is £2, no matter how many kits you buy. We also ship worldwide for £10 + £2 per additional item
If you are not 100% satisfied with your kit you may return it unopened within 30 days of purchase for a refund. In the case of returns due to a change of mind you will need to pay the return postage. We cannot refund kits which have been started.