Digital LCR Meter Inductance Resistance Capacitance Tester L C R Z X D Q ESR
Product Features
¤ The highest measuring frequency is 100kHz;
¤ Supporting DC Resistance and Electrolytic Capacitance Measurement;
¤ Automatic Recognition of Component Measurement;
¤ Support screening and deviation measurement;
¤ 2.8-inch TFT display, 4-bit semi-display;
¤ USB communication interface;
¤ Large capacity lithium battery power supply;
¤ Support SCPI protocol;
¤ Provide system settings, can configure language, buzzer, screen brightness and so on according to their own requirements;
¤ The basic measurement accuracy is 0.2%
¤ Adjustable measuring speed, manual and automatic range;
¤ Short circuit correction with open circuit;
¤ Provide multiple test ports.
Main technical indicators
Test frequency | 100Hz, 120Hz, 1KHz,10KHz, 40KHz, 100KHz |
Basic accuracy | 0.20% |
Display | 2.8 inch TFT LCD |
Display digit | Main parameters: 5 bits, secondary parameters: 5 bits |
Measurement parameters | Main parameters: L/C/R/Z, sub-parameters: X/D/Q/theta/ESR |
Electrolytic capacitor mode | √ |
DCR mode | √ |
measuring range | L：0.000μH～2000H，C：0.000pF～20.000mF，R：0.0001Ω～200.00MΩ |
Measurement display speed | 1/s (slow), 2/s (medium), 4/s (fast) |
Internal offset | 0-500 mV adjustable, 1 mV step. |
Test level | 0.1Vrms、0.3Vrms、0.6Vrms 1Vrms |
Calibration function | Open circuit calibration and short circuit calibration |
Screening function | The limit range of screening can be set to 1%-50%, of which the fixed points are 1%, 5%, 10%, 20%. |
Deviation measurement | Used to compare the percentage of deviation between the component and the nominal value set and display |
Other | Adjust backlight brightness, automatic shutdown time can be set, Chinese and English optional, USB Device communication |
Standard accessories:
¤ Mini-USB data Wires;
¤ Power adapter;
¤ Short circuit chip;
¤ Red&black rubber plug;
¤ Large capacity lithium battery
¤ Kelvin test clip