(SINGLE DIN) Aftermarket Stereo Installation Combo Kit
Easy (all-in-one) Complete Installation Setup
Complete Single DIN Dash Kit (with Amp Integrate Wire Harness)
Everything needed to convert a factory radio opening to (SINGLE DIN) aftermarket radio
This set up will save you time and frustration by eliminating the confusion of buying pieces separately.

The dash kit is designed specifically for your vehicle
It will line up with factory mounting holes to install easily
No more guessing which parts go together, here on ebay!
This is what we use in our shops - for selected vehicles below
Fit-ment for Dash Kit & Radio Wire Harness
|
Works only with these (SELECT MODELS) -
Works on Only 2004 Volvo Styles that resemble this below.
| S40 (Base / LSE Limited) |
2004 |
thru |
2004.5 |
| S40 |
2000 |
thru |
2003 |
Bonus Comes with Proper AM/FM Antenna Adapter Plug.
Recessed DIN opening.
Built in radio chassis support rail.
Fully illustrated instructions and mounting hardware included.
|
|
|
Please if your vehicle is not listed (you'll need a different setup)
eMail us or check search guide below!
|
|
Note: Wire Harness is for vehicles that (HAVE FACTORY AMP)
Vehicles with Factory Amplifier ( Non Digital Variety )
Special Amp Integration Harness
Allows aftermarket stereos to utilize factory Amps w/out bypassing ->Plugs into Head-unit at Radio Location
Retains Factory Amplifiers - Just connect Remote - Turn On Wire Remote Turn on - Usually Blue w/ White Stripe
Retains Factory Amplified / Premium Systems
:IMPORTANT NOTE: ( DOES NOT WORK WITH - CANBUS / RAP / OnSTAR / )
-
RAP If Factory Radio Continues to play (AFTER) pulling key from Ignition
-
R.A.P - is short for Retains Accessory Power : Below are systems with RAP
-
(VSS, CanBus, Onstar, Sync and other Digital Systems Use this feature)
-
(OnStar/Sync etc) Will not work, with these RCA quick Amp Interconnects
IF your vehicle has RAP or Can-bus Signature ( this part will not work ) Please Check our eBay Store for the Canbus/RAP version
| |
|
: FREQUENTLY ASKED QUESTIONS : |
| Q. What if I have a leased car ? or want to keep Aftermarket Radio if selling vehicle? |
| A. Simply Unplug Wire Harness & Re-attach Factory Radio into OE Plug |
|
Q. Will I need to modify anything or cut into my wires? |
|
A. No need to cut into any wiring! -these plug into each other
Then just match the EIA color code wires together |
| Q. What about my warranty - do I need to alter-anything? |
| A. (No Voided Warranties / No Cutting into Factory Harness)
No Special Modification is Necessary |

Powered by SixBit's eCommerce Solution