Twilight switch TS-31-1
0.2W power consumptionEquipment highlights:
- Our most sustainable product!
- only 0.2W self -power consumption, in standby and during work
- The switching level is adjusted logarithmically - thus precisely adapted to the photo
- High shock resistance up to 100a
- Plastic-free packaging made of recycling paper
- Very robust, many of our switches have been on duty for over 30 years
- Simple and professional assembly
- 3 year guarantee
4 Status LEDs - for easier function control
Top quality
through long -term Experience
Made in the EU
The twilight switch TS-31-1 independently switches on the consumer (lamps, advertising signs, etc.) when the darkness occurs and switches it off again at dawn.
In the twilight switch TS-31-1 you can also set a lower value range (1-30 LX), which is used for the outside lighting. The higher setting range (30-1000 LX) can be helpful for other applications.
Functions of the twilight switch TS-31-1:
Logarithmic adjustment characteristics, which is divided into three sub -areas:
| Sub -area 1 ... 10 LX | Subordly 10 ... 100 LX | Subordly 100 ... 1000 LX |
|---|---|---|
| Energy saving area to control the lighting of streets, houses, parks, squares, etc. | Standard area. | Control of the lighting of showcases, advertising, blinds, outdoor rolos etc. |
Low hysteresis, which leads to the economical handling of electricity consumption.
4 LEDs as status lights.
The LEDs provide information about the functional states (existing input voltage, reaching the circuit value (without delay), switching on the consumer. You will inform you about damage from the consumer if the LEDs tackle and the actual consumer does not.
Four connection terminals, as well as plenty of space for the connection cables.
High quality switching relay type G2RL-1-E from Omron with a switching flow of 16A.
For the installation, the cable is carried out by the cable screw connection on the lower side of the housing and hermetically sealed.
Technical data:
| Operating voltage | 230V AC,+10%,-15% |
| frequency | 50Hz |
| Maximum switching current: | |
|---|---|
| Ohmsche load | 16a, AC1 (4000 W) |
| Incandescent lamps | 10a (2500 W) |
| Halogen lamps | 8a (2000 W) |
| Fluorescent lamps | 8a (2000 W) |
| LED and energy -saving lamps | 8a (2000 W) |
| Electricity | 0.2W |
| Setting area | 1 ... 100 ... 1000 LX |
| Hysteresis | <Eoff = 2 eon |
| Delay of on/off switching | 60 seconds (± 20%) |
| Mechanical durability | 100,000 cycles |
| Protection type | IP 65 |
| Operating temperature range | -25 ...+50 ° C |
| Outer dimensions | 44 x 63 x 115 mm |
| Weight | 100g |
| Connection cable | Max 4 x 2.5 mm2 |
| Dowel (drill f 6mm) | 6 mm x 30 mm |
| Distance from the assembly holes | 84 mm |
| Assembly position | perpendicular |
| Type of assembly | Explusion using 2 dowels/screws |
- 1x twilight switch
- 2x screws/dowels
- 1x installation instructions