How to set an intercom system:

Step 1: Set the channel and code for each station : Long press channel key to set your channel. Short press channel key to call other intercom station. We suggest setting all the stations with the same code, then clicking other channels to communicate. You do not need to set a new code every time you call a different user.

Step 2: Distribute different stations for different users : After you set a different channel for each user, please mark the channel for each user you wish to call. Then, distribute to each user. (Note: please keep intercome at least 5 meters away to avoid interference while setting different stations).

Step 3: Use home intercom to communication with multi-functions : After every user has been assigned their intercom station, you can now make calls by simply clicking the channel of whom you wish to call. For each function, the monitor mode can help you look after children or elders anytime. This disconnects after 10 hours. Call mode can be used to talk to the same channel code intercom system. Group mode will talk with all intercoms simultaneously. VOX will automatically receive information (active for 24 hours).

For more details about each function, please check our user manual or send an email to our service team. You can also check the instruction videos.

Troubleshooting:

1. Channel key does not light----Check if the intercom have power; Check the intercom ON/OFF.

2. Cannot receive response----Please make sure the intercom set to designated channel? If not, be sure to release TALK when you are not speaking into the intercom. Also be sure you are not in MONITOR mode, MONITOR mode can not receive voice.

3. Cannot talk to another intercom----Are both intercoms set to the same channel and code? Please make sure they are properly set up and that you’ve waited until the other user has finished talking.

4. Strong, continuous "beep" sound----Move intercoms further apart to eliminate audio feedback. Or, change your intercom to another channel or code.

5. Unit doesn't work----Try the units in a different location. If the units work in a different location but not in your home, there may be a problem with your home concrete wall.

6. Static noise or cannot communicate----Confirm both units are set to the same channel and code when you want to communicate. Or, change locations by using Power Bank and moving to other locations for better reception and transmission. Or change the channel code.

Note:

1. Speaking and Hearing can not operate at the same time ：The intercom system is a real-time communication system which has no memory or storage function. Because of this, you cannot receive any information while you are talking with others. Additionally, you cannot speak to another user if they are speaking at the same time.

2. Set same channel & code before talking ：Please note that you will need to set the same channel and code if you want 2 intercom stations to receive communication. It also means any other intercoms can also communicate if they have same channel code. For example, your neighbors may be able to interfere with your intercom system. We suggest setting another channel or code to avoid interference.

3.A tip for setting your home intercom system : For example, let’s say you have a 4 station intercom system for your home for different rooms. You can set all 4 stations with the same code A (code A, B or C are choices), then you set different channels for all 4 stations. In this case, you can just click a channel number to call others without set code because your codes are all the same. If your system receives interference, you can change it to another code for all of your stations without changing every station's channel making this a very convenient option.

4.Keep the unit in the charge stand after each use ：Every intercom is equipped with a adapter (DC 5V1A), a cable and a charge stand. Please connect every intercom station to your local AC power. We kindly suggest that you keep the intercom stay in the charge stand after each use, or the intercom will power off in 24 hours. Press&Hold the ON/OFF button to turn ON it after finished charge.