Three Phase Clamp Power Meter for AC Voltage Leakage Current Active Power Etc 


Note: Battery Liquid not Included During The Shipping !!!

Main technical specifications!!!

Three-phase AC voltage, leakage current, power, phase, frequency, electric energy and phase sequence test, current limit:

0.00 Ma ~ 1200 A, voltage limit: 0.00 V ~ 600 V, power limit: 0.5 W ~ 720 kW, jaw size: 80X80 mm. Equipped with RS232

interface data upload function, data storage 200 groups.


Introduction:

  • Series Large Caliber Three Phase Power Meter can measure three phase AC voltage(0.00V~600V), current and leakage current(0.00mA～1200A), the phase of between voltages and between current(0.0°~360°), frequency(25Hz~100Hz), phase sequence, electric energy, active power, reactive power, apparent power, power factor, total power and other parameters.  CT size: 80mmx80mm, can clamp and test Φ80mm cable and flat steel grounding wire. 
  • The core is made of magnetic shielding material with strong anti-interference ability, ensures the accuracy and stability of measurement. The meter adopts Non-contact current measurement, safe and simple operation. with the backlight function, make the meausrement clearly visible in dark place.
  • The meter with data hold, data storage and other functions, can store 200 groups of data, the instrument connect computer by RS232 interface, stotage data can be uploaded to the computer, easy to read, analysis, save, print and so on.

Product Main Function:

  • Measurement of AC current, leakage current, Range:  0.00mA~1200A
  • Measurement of three phase AC voltage, Range:  0.00V~600V
  • Measurement of phase between UI and UU, Range: 0.0°~360°
  • Measurement of active power, reactive power, apparent power, power  factor, total power, frequency, phase sequence, electrical energy and other parameters
  • Data Storage: 200 groups
  • Line Voltage: below 600V
  • CT Size: 80mm x 80mm

Specification:

Function

Measure three-phase AC voltage, leakage current, current, active power, reactive power, apparent power, total power, phase between current and voltage, phase between phase voltage, frequency, electric energy, phase sequence, etc

Power Supply

6V DC(LR6×4 alkaline dry batteries, continuous working 12 hours)

Measurement method

Clamp CT，integration method

Clamp Size

80mmx80mm( can clamp Φ80mm wire, or 96mm × 4mm grounding flat steel )

Conductor Position

The detected conductor is in the center position of the clamp

Data Storage

200 Groups , flash display “FULL” symbol indicate storage full

RS232 Interface

With RS232 interface, storage data can be uploaded to computer, convenient to data analyze

Communication cable

RS232 communication cable, length: 1.8M

Frequency

50Hz/60Hz Automatic Identification

Shift

Automatic

Sampling Rate

2 times/second

Line Voltage

Below 600V circuit test

Display Mode

LCD：128dots×64dots；Display area：43mm×29mm

Meter Dimension

275mm(L)×145mm(W)×40mm(H)

Backlight

Yes, " * " key control

Data Hold

Data hold function: "HOLD" symbol display

Overflow Display

Exceed measure range overflow function: “OL” symbol display

Automatic Shutdown

15 minutes after power on, it will power off automatically without any operation to reduce the power consumption

Battery Voltage

While battery voltage is lower than 5.2V. low battery voltage symbol display, remind to replace the battery

Weight

1 kg (include the battery and accessories)

Working Current

Open backlight 50mA; Close backlight 25mA

Working Environment

-10℃~40℃；below 80%rh

Store Environment

-10℃~60℃；below 70%rh

Insulation Strengh

AC 3700kV/rms(Between iron core and shell)

Suitable Safety Standard

IEC1010-1、IEC1010-2-032、Pollution 2、CAT Ⅲ(600V)

Packing:

Package

Outer Package

Carton

Inner Package

Aluminum case

Accessory

Meter

1 PCS

Meter Case

1 PCS

Test Wires

4 PCS (Yellow, green, red, black)

Data upload software(CD)

1 COPY

RS232 Special Communication Cable

1 PCS

Manual

1 PCS

Certification

1 PCS

Warranty Card

1 PCS