index

12V 24V 100A ESC 997 Brush Motor Speed Controller 2-ways  Forward Backward Brake for RC Boat Marine Car Truck Tank

-- Description --
  • Widely use for RC boat, RC tug boat, RC fishing bait boat, RC cruise, RC marine, RC car, tank etc.
    Suitable for 540, 550, 775, 795, 895, 997 brush motor.
    Automatically to find the neutral point, No throttle rang calibration required.
    Build in 5V/3A UBEC,It can drive 2PCS 25kg sovers.

    Please Note: UBEC is a switching-Mode regulators, Please don`t use two ESC in parallel to power the receiver, otherwise they will be burned.

    Three Working modes （Be set by switch）:
    Mode 0: Forward/ Backward Model.
    Mode 1: Forward/Brake/Backward( neutral point brake )
    Mode 2: Forward/Brake/Backward( Throttle stick move back brake )

    Mode 0: no brake
    Mode 1: The throttle stick move back to the neutral postion, the motor braked to a stop. When the motor is forward rotation, pull back the throttle, motor reverses immediately.
    Mode 2: The throttle stick move back across the neutral postion, the motor braked to a stop,At this time, if you want to reverse the motor, you must move the throttle stick to the neutral ponit first.

    LED Indicate:
    LED on-- Working normally
    LED flash-- The throttle stick is not at the neutral point
    LED flash fast-- Signal lost

    How to use:
    1, Connect with receiver,motor,battery correctly.
    2, Turn on the power of ECS, If the transmitter is off, LED will flash fast.
    3, Push the throttle stick to the neutral point,Turn on the transmitter, and adjust the throttle trim until the LED on.that means the neutral position has been confirmed.
-- Specification & Features --
  • - Working Voltage: 10.5V-26V ( LiPo 3S-6S )
    - Remote control signal PWM:  800us-2200us
    - Neutral Point: 1500us
    - Input plug: T plug/ XT60 plug  optional
    - Out plug: 4mm banana connector
    - Build in 24PCS MOS FET
    - "H" bridge structure
    - Continuous/Peak Current: forward 100A/640A, Backward 100A/640A
    - Rated Power: 1000W
    - Motor Limit:
       Drive ability at the same time at 12V:  3PCS 540, 3PCS 550, 2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 Motors
       Drive ability at the same time at 24V:  2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 Motors
-- Item Contains --
  • 1 piece of 100A ESC Brush Motor Speed Controller
   

★

Payment
  • We only accept PayPal. Payment must be made within 7 calendar days of the auction end time.

✈

Shipping
  • US usually takes about 7-14 days.
  • Other countries usually takes about 20-35 business days.
  • If  you want the items are shipped by Expedited Shipping (such as DHL,UPS,EMS,Fedex),please choose the Expedited Shipping or contact me.
  • It maybe delay for hot sales season,Strike,bad weather,and so on. It will take more time to ship to some countries. Thank you for understanding!

▶

Return Policies
  • You get 3 month guarantee, and 14 days return policy after get the item, Always buy from me with confidence!
  • If you receive a unsatisfactory item or don't arrive in time. please send us a message via ebay. We promise to give you a satisfactory solution in one working day.
  • Please contact us before you return it (Please do not open return case,we will try our best to solve your problems,thanks)

☏

CONTACT US
  • Because of the time difference, our work time is according to Beijing time (GMT +8:00).
  • 9:00am to 5:00pm Monday to Friday
  • I am ready and eager to answer your question at first time,We apologize for the late reply during the holidays.