|
Listed for sale are Genuine LSI 9212-4i4e SAS HBA controller cards that I flashed for use with ZFS. They have been flashed to Avago / LSI 9212-4i4e IT (Initiator Target) firmware version P20 (specifically 20.00.07.00). I also flashed the LSI/Avago MPTSAS2 BIOS ROM version 07.39.02.00 and UEFI 07.27.01.01 so that it is easier to access the controller's ROM without booting an OS. This 9212-4i4e board is based on the LSI SAS2008 chipset, and is essentially the same design with 4x internal SATA ports (SAS capable) and 4x external SAS lanes in a single SFF-8088 port. This is a full profile PCIe bracket with ventilation holes to improve airflow over the heatsink.
- LSI Avago IT mode firmware version P20 (20.00.07.00)
- MPTSAS2 BIOS ROM flashed version 07.39.02.00
- MPTSAS2 UEFI ROM flashed version 07.27.01.01
- Original SAS address preserved
- Ventilated standard / full profile PCI bracket
- 4x internal SATA ports + 1x external SFF-8088 port.
These are based on the LSI SAS2008 SAS controller chipset and support PCI-E 2.0 specifications with x8 lanes. The controller has 4x SATA and 1x SFF-8088 connectors, for total of 8 SAS lanes. You will need a compatible cable to connect these to your hard drives or a backplane/enclosure.
These cards are fully tested in my Supermicro server running ZFS on Linux (ZoL), but this setup is also ideal for other ZFS setups, FreeNAS, unRAID, Proxmox VE, etc. I have fully tested them using all 8 SAS lanes.
Not exactly the HBA / IT mode adapter you were looking for? Check out the HBA section at my ebay store here.
Feel free to ask any questions.
|