DIY KIT IN-14 Arduino Shield Nixie Tubes Clock Shield for Arduino UNO/ MEGA NCS314 HW v2.2
We provide FREE WORLDWIDE Economy shipping
 UPS Expedited delivery 3-5 days available



DIY KIT for IN-14 Shield Nixie Clock with Columns
Developed for 6 IN-14 xUSSR Nixie Tubes
IN-14 Tubes are one of the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
DIY KIT developed for Tubes Shield Board and Control Arduino Board
Options include Tubes, Columns, Arduino and Power Supply
DIY KIT is made for Arduino UNO and MEGA 2560 Control Boards
It allows you to write your own uniqe programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH




Example of assembled Shield NCS314 Board:


Listing includes:

  • Tubes Shield (NCS314 v2.2) Bare PCB
  • IN-14 Nixie Tubes – 6 pcs
  • Set of Electronic Parts and Components for Shield (NCS314 v2.2) Board
  • Set of Screws and Spacers for Shield and Arduino Boards
  • Principal Electrical Scheme on paper
  • BOM List for Shield (NCS314 v2.2) Board
  • User Manual on a Vintage style paper


The base listing contains only BARE PCB and full set of electronics parts

Without Arduino, Columns and Power Supply

Listing includes bare PCB to make Shield NCS314 with soldered IN-14 Nixie Tubes


This listing does NOT contain the Arduino board and power supply

  • We are selling already flashed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951
  • Flashed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626
  • Power supplies: www.ebay.com/itm/162367596648
  • Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779
  • Glass Column: www.ebay.com/itm/162276387248
  • GPS Receiver GA-6: https://www.ebay.com/itm/162682147400
  • IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139


…And upload software into your arduino

  • Link to (software) github.com/afch/NixeTubesShieldNCS314
  • Link to (video tutorial)



Our Benefits:

  • Easy to build beautiful clock – we offer housing
  • Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.
  • Fast uploading via USB
  • The latest version of the firmware always available on GitHub
  • No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.
  • Human friendly menu
  • Very high qualty of Printed Circuit Boards
  • Japan alluminium capacitors
  • Power-On Self-Test
  • Technical support



Dear customers!
If you have ANY questions, PLEASE ASK us


Software Features:

  • Shiled support 6 IN-14 Nixie tubes [hh:mm:ss]
  • Full static display mode
  • Slote Machine (Ani poisoning)
  • Temperature display (DS18B20) [Celsius or Fahrenheit]
  • GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included)
  • Operation via IR remote control (Remote control Sony RM-X151, not included)
  • No need refresh or update information on the tubes
  • The maximum possible brightness of the tubes
  • 12/24 hour format.
  • Date format: DD:MM:YY
  • Unique RGB LEDs backlight with 16,7 million colors.
  • Very easy to switch LEDS off/on.
  • As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).
  • Easy updating firmware via USB using Arduino IDE.
  • Power On Self-Test (POST): LEDs test, tubes test, sound test.


Hardware Features:

  • Integrated High Voltage Power supply: 150 – 220V.
  • 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).
  • Test points for testing, adjusting and controlling low and high voltage circuits.
  • Internal buzzer.
  • RTC (Real Time Clock) High precision time chip DS3231 with Backup battery
  • Acquiring time via external GPS module (only with Arduino Mega)
  • 3 buttons on board to control
  • Potenciometer to adjust High Voltage
  • IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library)
  • Temperature sensor DS18B20
  • 8 pcs of RGB SMD LEDs
  • SPI up to 4Mhz
  • Places for 2 column with 2 neon dots inside
  • Separate controls upper and lower dots.
  • Power consumption: 12V, 760mA. Recommended: 12V, 1-2A (center pin positive +)
  • Reverse polarity protection
  • Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in)


Shields comparison table:


https://youtu.be/58xMATPCJ-I


https://youtu.be/FMEhx8zmo_0

Board dimensions in 2D and 3D


Nixie Tubes Clock Shield for Arduino NCS314:

This is example of assembled Shield Board NCS314

The base listing contains only BARE PCB and full set of electronics parts (Arduino, Columns and Power Supply are not included)


User Manual

Dear customers!
If you have ANY questions, PLEASE ASK us



Shipping and Return information


All Items are shipped from Ukraine
Via International registered Airmail
Shipments are made within 1 business day
After the payments are received and verified
It takes about 4-7 days via UPS Express delivery
It takes about 10-18 days via Standerd shipping
It takes about 35-45 days via Economy shipping
We combine multiple Items to save on shipping



UPS Express Shipping time (recommended):

Europe:3-5 days
Germany:3-5 days
USA, Canada:4-7 days
Asia, South America:5-7 days
Australia, New Zeland:5-7 days
Africa, Central America:5-7 days



Standard Shipping time:

Europe:10-12 days
Germany:10-12 days
USA, Canada:10-15 days
Asia, South America:10-18 days
Australia, New Zeland:12-18 days
Africa, Central America:12-18 days



Economy Shipping time:

Europe:25-30 days
Germany:25-30 days
USA, Canada:30-35 days
Asia, South America:35-45 days
Australia, New Zeland:45-55 days
Africa, Central America:45-55 days




Return Policy

All Returns are accepted

  • For Return you should contact Us within 14 Days after receiving the Item
  • Refunds are made as Money back or Replacements (buyer’s choice)
  • Return Shipments are paid by the buyer
  • No restocking fees are charged