TFSC 01 Fork Spring Compressor Tool for Most Road Racers Motorcycles Sport Bikes

ITEMS DESCRIPTION


♦【Perfect Fit】
Designed to work on most current sport bikes, road racers and motorcycle with cartridge type forks, such as Victory Cross Country, Victory CCT, Kawasaki, etc.

♦ 【Durable & Reliable】
Built with premium-grade steel to deliver years of exceptional value, hardened for high strength, black powder coated at surface to reach a superior rust and corrosion resistance ability.

♦ 【Helpful Tool】
Designed to fine-tune your ride so you can enjoy top-notch performance, this tool relieves spring pressure for taking off fork tube caps without damaging threads.  

♦ 【Innovative Design】
Innovative design allows you to use the tool with forks on or off the bike, provide a simple and fast operation. Simply adjust the length and width by screw the nut on the top to and the bolt near the top to fit your forks.
 
♦ 【Specification】
  • Part Number:TFSC 01
  • Type:Fork Spring Compressor Tool
  • Material:High Strength Stainless Steel
  • Item Length:23.15 in
♦ 【Package Included】
1x TFSC 01 Fork Spring Compressor Tool

How To Use The Fork Spring Compressor Tool

  1. Mount the fork leg in the Spring Compressor.
  2. The Pin on the Foot goes into the hole in the bottom of the fork.
  3. Put the pins of the Spring Compressor into the holes and tighten the adjuster screw until both pins are fullycaptured by the hole.
  4. Tighten the Spring Compressor with an electric drill with a socket or a speed handle but make sure you stop before the tool hits the top of the fork tube.
  5. Once the fork is compressed enough, extend the damping rod and remove the Bleeding Tool.
  6. Install the Fork Cap. Make sure the Fork Spring Preload Adjuster is backed out all the way.
  7. Bring the jam nut up against the fork cap.
  8. Back out the adjuster a few clicks to give the Needle clearance from the Seat while you.
  9. Tighten the Jam Nut.
  10. Unscrew the Fork Spring Compressor Tool, remove the fork leg from the tool, and tighten the Cap.
  11. Set all your adjusters, mount the forks on the bike, and enjoy.
     
PushAuction