Briggs & Stratton Snow Engine 208CC 950 9.5
Qualified to start down to -20 F
2-year limited warranty
S-13D1360010F1BH0040=13D136-0010-F1
Weight 43 lbs.
Here some pictures of a re-power we just did on a 2000 Toro 521 The only modification we did was the snow shoot had to move out from handle
You Tube Video https://youtu.be/NmhgL-hI0VA
This is only for the engine
This engine is direct from Briggs & Stratton they were
ship in crates of 8 engines. We will re-box and ship them out. They will NOT be
in a Briggs & Stratton packaging.
We are in Parowan Utah will calls are welcome.
It will be plus shipping. Box size 18” X 18” X 18” 43 lbs.
In short if you are re-powering a Snowthrower These
measurements are industry standard. Please check on your old engine to make
sure it will fit.
The PTO Shaft is ¾”X 2-27/64” 5/16-25 Tap 3/16” Keyway
Height from Base to
PTO approx. 4 1/8”
Base mounting holes 3 1/8” X 6 ¾”
Pull Start only
|
Model Series |
13D1 |
|
Power Lbs/Ft of Torque |
9.5 |
|
Engine Series |
950 |
|
Displacement |
208 |
|
Oil Capacity |
20 oz (0.6 l) |
|
Valve Configuration |
OHV |
|
Flywheel Torque |
65 lb/ft (88.0 Nm) |
|
Governor Arm Torque |
40 lb/in (4.5 Nm) |
|
Carb Mount |
40 lb/in (4.5 Nm) |
|
Plug Gap |
0.03 in (0.75 mm) |
|
Intake Valve |
.004-.006 in (.10-.15
mm) |
|
Exhaust Valve |
.006-.008 in (.15-.20
mm) |
|
Idle Speed |
1750 |
|
Air Gap |
.010-.014 in (.25-.36
mm) |
|
Flywheel Puller Part |
19203 |
|
Flywheel Holder Part |
19433 |
|
Connecting Rod Torque |
125 lb/in (14.0 Nm) |
|
Sump Torque |
210 lb/in (24.0 Nm) |
|
Head Torque |
210 lb/in (24.0 Nm) |
Technical Specifications
|
Model Series |
13D1 |
|
Power
Lbs/Ft of Torque |
9.5 |
|
Engine
Series |
950 |
|
Displacement |
208 |
|
Oil
Capacity |
20
oz (0.6 l) |
|
Valve
Configuration |
OHV |
|
Flywheel
Torque |
65
lb/ft (88.0 Nm) |
|
Governor
Arm Torque |
40
lb/in (4.5 Nm) |
|
Carb
Mount |
40
lb/in (4.5 Nm) |
|
Plug
Gap |
0.03
in (0.75 mm) |
|
Intake
Valve |
.004-.006
in (.10-.15 mm) |
|
Exhaust
Valve |
.006-.008
in (.15-.20 mm) |
|
Idle
Speed |
1750 |
|
Air
Gap |
.010-.014
in (.25-.36 mm) |
|
Flywheel
Puller Part |
19203 |
|
Flywheel
Holder Part |
19433 |
|
Connecting
Rod Torque |
125
lb/in (14.0 Nm) |
|
Sump
Torque |
210
lb/in (24.0 Nm) |
|
Head
Torque |
210
lb/in (24.0 Nm) |
Alternator
Specifications
|
Alternator |
591533 |
||||||||||||||||
|
Type |
AC
Only |
||||||||||||||||
|
Testing
RPM |
3600 |
||||||||||||||||
|
AC
Volts |
12vac |
||||||||||||||||
|
Crankshaft Specifications
|
|
We at
Red Rock Turf are a stocking distributor for Briggs and Stratton, Kohler, and Toro. We not only sell their OEM parts we also use them on our equipment
repairs and rebuilds. If there is something you need and don’t see it on one of
our auctions, please email me through eBay and I can get it in and create an
auction for that item.