Introduction:

• The design of  hand-held digital Tesla meter follows the IEC-61010-1safety standard, and conforms to the national verification regulation ofJJG242-1995 Tesla meter.
• Hand-held digital Tesla meter adoptsnot only the high-sensitivity Hall sensor and high-resolution A / Dconversion chip, but also the popular single-chip computer technologyand digital filtering technology . 
• It has the advantages of highsensitivity, stable reading, low power consumption , and light weight.
• The measurement range is 0-2000 Mt, and the basic accuracy is ±1%. It has the characteristics of automatic zero, automatic measurement range,keeping of maximum / minimum values, etc.

Feature:

• The product consists of three measurement accuracies, +/-1%, +/-2%, +/-5%, with different grades for different prices.
•  (The product for this order 's accuracy is +/-5% )
•  Dedicated to measuring the surface flux density of permanent magnet materials B, range: 0 to 2400 mT
• The value can be switched by one button: mT (mite) or G (gauss).
• With automatic zero and auto range, and maximum hold function.
• With backlight adjustment, power display and automatic shutdown function.
• Light weight and low power consumption.

Specification:

• Level 5 technical specifications
• Range :200 mT 2000 mT
• Range of measurements:0 ~ 120%
• Minimum resolution :10uT
• Basic accuracy :0~1000mT：±2% ,1000mT~2400mT：±5%
• Number of digits displayed :4 bits (Decimal)
• Power supply :one 9 V battery(battery is not included)
• Working temperature :0℃ ~ 50℃
• Storage temperature :-20℃ ~ 50℃
• Shape size :160 mm × 80 mm × 32 mm
• Hall Sensor size :length:45mm,thickenss:1.6mm,width:4.5mm
• Device weight :260 g (including batteries and wires)
• Hall probe Longitudinal Hall probe, wire length is about 2 meters