National Instruments PXI-7030/6040E 12-Bit Real-Time Multifunction I/O Board
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from National Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This board is guaranteed to work.

The Unit's Information Reads:
Model Number: 7030/6040E
Part Number: 184359D-07
Serial Number: CD51F3

Features:

Description:
The National Instruments RT Series Cards are multifunction DAQ devices with an embedded processor that provide high-performance data acquisition. These boards provide an easy-to-use system for real-time applications. Each device has a DAQ daughterboard and a processor board that runs real-time, embedded LabVIEW RT applications.

The RT Series Cards deliver real-time, deterministic, and reliable I/O for measurement and control. Each board has an independent processor running a real-time operating system.

RT Series Multifunction I/O Specifications:
Bus: PXI
Analog Inputs: 16 SE/8 DI
Resolution: 12 bits
Sampling Rate*: 500/250¹ kS/s
Input Range: ±0.05 to ±10 V
Analog Outputs: 2
Output Rate*: 1 MS/s
Output Range: ±10 V
Digital I/O: 8
Counter/Timers: 2, 24-bit
Triggers: Analog and Digital
Notes:
  1: Single-channel/multichannel rate

Processor Board Specifications (7030):
Processor: AMD 486DX5 32-bit architecture
Processor Clock Speed: 133 MHz
CPU Bus Speed: 33 MHz
Memory: 32 MB EDO DRAM
On-chip Cache: 16 KB write-back
L2 Cache: 256 KB write-back
Floating Point Unit: Yes

Host-Embedded Communication Specifications:
Shared Memory:
  Type: SRAM
  Size: 1 KB
Power Requirements:
  ±5 VDC (±5%): 3.0 A (typical)
  Power Vailable at I/O Connector: +4.65 to +5.25 VDC, 1 A
Physical Dimensions (Not Including Connectors): 16 cm x 10 cm (6.3" x 3.9") (2 PXI slots)
Environment:
  Operating Temperature: 0 to 55°C
  Storage Temperature: -20 to 70°C
  Relative Humidity: 10 to 90% noncondensing

For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $15.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.

Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:

(1) Are you the end-user of this item?

(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.

(3) What is the ultimate country destination?

08/08/18