Tektronix TDS380/TDS 380 400 MHz 2-Channel 2 GS/s Digital Oscilloscope
Comes with a manual and what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from Tektronix and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit ships guaranteed working for 30-days, parts and labor, excluding freight.
The Unit's Serial Number Tag Reads:
Model Number: TDS380
Serial Number: B014483
Firmware Version: V1.09
Features & Benefits:
400 MHz Bandwidth
2 GS/s Sampling Rate
Two Input Channels
Built-in 3.5 in. Floppy Disk Drive
2 mV/div to 10 V/div
AutoSetup
Accumulate Display Modes
2% Vertical Accuracy
1K Record Length
Roll Mode
21 Automatic Measurements
FFT Analysis
10 ns Peak Detect for High-speed Glitch Capture
Option 14 for GPIB, RS-232-C Programmability, Parallel Printer Interface, & VGA Monitor Output
Description:
With the TDS300 Series, Tektronix redefines the low-cost digital oscilloscope. No other digital scope offers as much bandwidth and sample rate for the price. By simultaneously sampling at up to five times their bandwidth on both channels, the TDS300 Series assures you of true acquisitions, minimizing aliasing or other digital sampling effects. Unlike other DSOs, the TDS300 Series easily gathers enough samples to display waveforms accurately at their full bandwidth. These are the only scopes in their class to reliably acquire high speed transient or single-shot events to their full bandwidth.
Many low-cost DSOs offer only dot displays, which can be hard to interpret, especially for those accustomed to analog oscilloscopes. The TDS300 Series has Dot, Dot Accumulate, Vector, and Vector Accumulate displays. The Accumulate display modes gather multiple waveforms for a user-defined time (500 ms to infinity), after which the screen is erased. Vector Accumulate mode uses bright vectors to superimpose the current acquisition over the accumulated waveforms. The display is erased at the user-defined time or when the acquisition setting is changed. These modes are useful for doing worst case analysis or signal monitoring. Long term monitoring is easily accomplished by setting the erase time to infinity.
Signal Acquisition Specifications:
Bandwidth: 400 MHz
Sample Rate: 2 GS/s on each channel
Channels: Two identical channels, each with invert function
Sensitivity: 2 mV to 10 V/div (with calibrated fine adjust)
Position Range: ±5 divisions
Calibrated Offset Ranges:
| Volts/Div Setting: |
Offset Range: |
| 2 - 99.5 mV/div |
±1 V |
| 100 - 995 mV/div |
±10 V |
| 1 - 10 V/div |
±100 V |
DC Gain Accuracy: ±2%
Vertical Resolution: 8-Bits (256 levels over 10.24 vertical divisions)
Acquisition Modes: Sample, Envelope, Average
Peak Detect: High-frequency and random-glitch capture; Captures glitches as narrow as 10 ns using acquisition hardware at all time/div settings between 25 µs/div and 5 s/div (inclusive)
Time Base System (Main and Delayed) Specifications:
Time/Division Range: 1 ns to 5 s/div
Record Length: 1000 sample points per channel
Horizontal Accuracy: ±0.01%
Roll Mode: 0.1 s/div and slower when Auto Trigger Mode is selected
Triggering System (Main Only) Specifications:
Trigger Types: Edge, Video
Trigger Modes: Auto, Normal
Trigger Inputs: CH1, CH2, Line, External
Video-Type Trigger Formats and Field Rates: Triggers on Field 1, Field 2, Any Field (noninterlaced systems), or Lines; from Sync-negative composite video. Triggers on broadcast standard NTSC, PAL, or SECAM video and other interlaced and noninterlaced video with horizontal line rates from 15 to 65 kHz (in 5 ranges) and field rates from 50 to 60 Hz.
Display Specifications:
Sin(x)/x Interpolation
Vector - Connects sample points to display a continuous waveform
Dots - Displays sample points only
Vector Accumulate Mode - Accumulates waveform points over a preset period of time (500 ms to infinity) and superimposes the current waveform with bright vectors
Dot Accumulate Mode - Accumulates waveform points over a preset period of time (500 ms to infinity)
Format - YT and XY
Automatic Measurements Specifications:
Period
Frequency
+Width
-Width
Rise Time
Fall Time
+Duty Cycle
-Duty Cycle
+Overshoot
-Overshoot
High
Low
Max
Min
Pk-Pk
Amplitude
Mean
Cycle Mean
RMS
Cycle RMS
Burst Width
Cursors Specifications:
Types: Horizontal bars, vertical bars, paired (volts at time)
Measurements: Absolute volts, DELTA volts, time and frequency
Physical Specifications:
Weight: 15.5 lbs (6.9 kg)
Dimensions: 14.3" W with Handle x 18.6" D (22.2" with handle) x 6.5" H
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $20.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
03/27/18
|