1X Competitive MAX6675 MAX31855 Module + K Type Thermocouple Sensor for Arduino
MAX31855 Module 1

1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero
2. SPI interfaces, high-speed transmission
3. the input voltage is 3-5v DC
4. direct digital output temperature value, no amplifiers, no ADC
5. 14-bit resolution, 0.25 degree temperature accurac

Note
1.Works with any K type thermocouple
2 K thermocouples have about ±2°C to ±6°C accuracy
4.Internal temperature reading
5.3 to 5v power supply and logic level compliant!
6.SPI data output requires any 3 digital I/O pins.
 
MAX31855 Module 2

100% brand new and high quality
With cold port compensation
Convert K, J, N, T or E-type thermocouple signal into digital data
Output 14Bit data
Resolution: 0.25°C
Highest Temperature: +1800°C
Lowest Temperature: -270°C
For K-type thermocouple, temperature range -200°C~+700°C, +/-2°C precision

K Type Thermocouple Probe Sensor

100% Brand New Item
This item has been tested in good working condition
Temperature rang: -50~ ~300℃
Material: Fiberglass
Cable Length : 1M
Type : K
Net Weight: 5 g
Line 2 * 0.4 (Diameter of the wire is 0.4mm )

1M K Type Thermocouple

Brand new and high quality.
Type K Type.
Temperature Range:0-800°C.
Thread Diameter:6mm / 0.23".
Internal Insulation:Fibreglass.
External Shielding:Metal Shield.
Total Length:1M / 39".
Fork Terminal Spacing: 3.5mm / 0.13".
Color: As Picture Shown.
Designed with two fork terminal, 6mm thread sensor for accurate measurement.
Works well with temperature controller(not included here), wide measurement range of 0-800 degree celsius.
Size:100cm x 1cm x 1cm - 39.37inch x 0.39inch x 0.39inch.

MAX6675 Module

Interface: SPI
Test Temperature Range: 0 ℃ ~ 1024 ℃, the converter temperature resolution is 0.25 ℃
Operating Voltage Range: 3.0 ~ 5.5V
Operating Current: 50mA
Operating Temperature Range: -20 ℃ ~ 85 ℃
Module Size: 15mm * 28mm, with a 3mm diameter screw holes
K type thermocouple junction location, use 301 ordinary terminals
Application: Industrial, Appliances, HVAC

MAX6675 Module+1m Thermocouple Sensor
1.Working voltage: DC5V
2, Operating Current: 50mA
3, the temperature measuring range: -200°C - 1300 °C [Test procedure for 0-1023 °C]
4, the temperature measurement accuracy: ± 1.5 °C
5, the temperature resolution: 0.25 °C
6, the output mode: SPI digital signal
7, with a fixed mounting holes for easy fixed installation.
8, storage temperature: -50 ~ 150 °C
9, the module weight: 4g
10, module size: 25mm * 15mm * 13mm
This module is only for reference routines and instructions, please note left after shoot-mail or contact sales technical hair item.

Package included:

1Pcs
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
  • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
  • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

 

Am 03.11.17 hat der Verkäufer die folgenden Angaben hinzugefügt:

 

 
DataCaciques