HIGHLIGHTS
COMPATIBILITY
- Accommodates 2.5" Solid State Drive (SSD) hard drives
- Accommodates 3.5" Serial ATA (SATA) hard drives
- No adapters required for 2.5" hard disk drives
STANDALONE & EASY TO USE
- Completely standalone means NO software or computer required
- User-friendly LCD display interface
- Simple controller buttons allow easy execution of functions
MULTIPLE DUPLICATION AT ONCE
- Copies several HDDs/SSDs every session (units larger than 1 to 1 ONLY)
- Clones hard disk data sector by sector
- Built for continuous burning, requires NO cool down
HIGH SPEED CONTROLLER
- Fast data transfer rate of up to 150MB per second (9GB per minute)
- Quality performance buffer speed of 128MB
- Lower power requirements (compared to IDE/PATA duplicators)
COPY MODES
SYSTEM AND FILES:
- Copies data content from master source hard drive (excluding any unoccupied drive space).
WHOLE HDD:
- Copies entire content of master source hard drive (including any unoccupied drive space).
Supported formats:
-
-Windows: FAT16/Fat32/NTFS
-
-Linux: EXT2/EXT3
-
-Mac: HFS
ERASE MODES
QUICK ERASE:
- Erases data content of target hard drive(s) ONLY (not including format of drives).
FULL ERASE:
- Erases data content and format of target hard drive(s).
DoD ERASE:
- Complies with USA Department of Defense (DoD 5220) standard.
- Erases all data bit-by-bit 3 times to ensure permanent deletion.
FEATURES & DETAILS
-
COMPLETE STANDALONE : No computer or software required
-
WARRANTY: 2 year parts, 3 years labor, lifetime technical support
-
COMPATIBILITY: Fits both 3.5" and 2.5" hard drives without the need of an adapter
-
TRANSFER RATE: Copy multiple hard disk drives or solid state drives simultaneously at speeds up to 150MB per second (9GB per minute)
-
DUPLICATION & SANITIZATION: Copy systems and files (data only) or whole hard drive; erase hard disk drives or solid state drives, compliant to DoD 5220.22-M data sanitization
SPECIFICATIONS:
- Model Number: SYS2011HS-DP
- Interface: Serial ATA (SATA)
- Load Type: Slot Loading
- Data Buffer Memory: 64 MB
- Power Supply: Input: 100~240V AC
- Operating Humidity: 15% ~ 90%
- Regulation: FCC, CE
SPECIFICATIONS
FEATURES |
|
Device Type
|
|
| Interfaces |
|
Load Type
|
|
Maximum Transfer Speed
|
- 9GB/min (150MB/sec). Actual performance is dependent on HDD transfer speeds.
|
Capacity
|
- Supports the largest sized devices available on the market
|
Operating Type
|
- Stand-alone, FPGA-based operation (Non PC-based)
|
Supported Languages
|
- English
- Japanese
- Spanish*
- Portuguese*
(* Not available on all models)
|
LCD Display
|
- Backlit Monochrome LCD Display
|
Buffer Memory
|
|
HDD Hot Swap
|
|
Control Panel
|
- 4 Push Buttons (▲, ▼, OK, ESC)
|
Color
|
|
FUNCTIONS |
|
Copy Modes
|
- System and Files (Quick Copy Mode):
Copies data and skips empty space. Only supports Windows, Mac, and Linux.
- Whole Device/Media:
Copies from the initial sector to the end, bit-by-bit. No format limitations. Supports all systems and proprietary formats, along with various brands.
- All Partitions:
Copy or skip HPA, DCO, unknown partitions, modified formats, etc., defined by settings.
- Percentage*:
Copies the selected range of the source's total capacity, starting from the initial sector.
(* Not available on all models)
|
Compare Function
|
- Bit-by-bit data comparison
|
Sanitization Modes
|
- Quick Erase:
Erases the table of contents of file system of target hard drives.
- Full Erase (NIST SP 800-88 R1):
Erases the target hard drive's total capacity bit by bit by adding 0s to each bit of each sector.
- DoD Erase:
Complies with DoD 5220 standard to fully erase the target hard drive by rewriting bit by bit three times to guarantee data is permanently deleted.
|
Read-Only Source Port
|
|
COMPATIBILITIES |
|
Compatible Devices
|
- 2.5"/3.5” SATA HDDs and SSDs
|
Supported Formats
|
- Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX)
|
Whole Device Copy Function
|
- All formats, including proprietary formats: GPT, MBR, and advanced formats
|
Supported O/S
|
- All (Windows, Mac, Linux, and other stand-alone systems)
|
HARDWARE SPECIFICATIONS |
|
Power Supply
|
- Universal Power: 115VAC or 230VAC, 50/60Hz
|
Working Temperature
|
- 5°C ~ 45°C (41°F ~ 113°F)
|
Storage Temperature
|
- -20°C ~85°C (-4°F ~ 185°F)
|
Working Humidity
|
|
Storage Humidity
|
|
* Specifications are subject to change without notice.